1. Manuals
  2. Brands
  3. Meccanica Benassi Manuals
  4. Engine
  5. RT 401
  6. User manual

Meccanica Benassi RT 401 User Manual

Hide thumbs

Advertisement

Table of Contents

GB
MOTORHOE RT 401
READ THIS MANUAL CAREFULLY
All right reserved
This manual cannot be either reproduced or released without the
manufacturer's prior written consent.
PRINTED IN ITALY
1 - FOREWORD
This symbol is used to highlight an important safety information.
If this information is ignored, people are in danger either of
possible injures – even serious ones – or death.
IMPORTANT
This term highlights special precautions to be taken in order not
to damage the machine.
The machine serial number is printed on the drive box.
Always mention the machine serial number when calling our technical service or when ordering spare parts.
The CE mark is on the engine support right side.
Gasoline engine
USER'S MANUAL
2 - IDENTIFICATION AND MARKING
IMPORTANT NOTE
MARKING
1.
FOREWORD
2.
IDENTIFICATION AND MARKING
3.
CONDITIONS-USE
4.
WARRANTY
5.
SAFETY WARNINGS
6.
NOISE AND VIBRATIONS
7.
PACKAGE OPENING
8.
WARNING SIGNS
9.
TECHNICAL FEATURES
10. TECHNICAL DATA
11. DRIVING SIGNS
12. TILLER WORKING WIDHT
13 CAUTIONS BEFORE STARTING
14 MACHINE STARTING
15 ADJUSTMENTS
16 ENGINE SAFETY DEVICE
17 LUBRICANTS
18-18/1 TILLER SET
19
DECLARATION OF CONFORMITY
Use and maintenance instructions of the engine are
mentioned in the relevant manual, copy of which is always
supplied with every machine.
Marking example
.
- 0 -
03/05
INDEX
ENGINE
Pag. 0
Pag. 0
Pag. 1
Pag. 1
Pag. 2-3
Pag. 4
Pag. 4
Pag. 4
Pag. 5
Pag. 5
Pag. 6
Pag. 6
Pag. 7
Pag. 8
Pag. 9
Pag. 10
Pag. 10
Pag. 11
Pag. 12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RT 401 and is the answer not in the manual?

Questions and answers

Summary of Contents for Meccanica Benassi RT 401

  • Page 1 03/05 MOTORHOE RT 401 Gasoline engine USER’S MANUAL INDEX FOREWORD Pag. 0 IDENTIFICATION AND MARKING Pag. 0 CONDITIONS-USE Pag. 1 WARRANTY Pag. 1 SAFETY WARNINGS Pag. 2-3 READ THIS MANUAL CAREFULLY NOISE AND VIBRATIONS Pag. 4 PACKAGE OPENING Pag. 4...

  • Page 2: Warranty

    Descriptions, figures and technical features mentioned herein are non-binding for the Manufacturer. These are mentioned as mere information. The Manufacturer reserves the right to make any change at any time without being bound to update this publication. Copyright of MECCANICA BENASSI S.P.A.” - 1 -...

  • Page 3: Safety Warnings

    5- SAFETY WARNINGS This machine has been designed and manufactured for being used by one operator only, and is driven by means of the appropriate handlebars. Any other use is not permitted.! Before the machine is operating, read the Use and Maintenance manual thoroughly, so that you are fully aware of all the operating controls and safety aspects of the machine.
  • Page 4 5- SAFETY WARNINGS 20) Engage the clutch gradually; sudden engagement could cause the machine to rear up. 21) The area next to the engine exhaust will most likely reach temperatures above 80°. Attention! Danger of scalding. 22) Always wear close fitting clothes and anti-slip shoes or boots. For safety reasons avoid using loose clothing.

  • Page 5: Package Opening

    6 – AIRY NOISE AND HANDLEBAR ’S VIBRATIONS ATTENTION ! For your safety please follow these instructions : AERIAL NOISE: Sound pressure value according to rules EN12733:2001 Leq (dBA) 85,5 – guard-ears to be put on. Sound power level : LWA 95,5 Dba HANDLEBAR VIBRATIONS : value according to rules EN12733:2001 7 - PACKAGE OPENING CRUSHING DANGER...

  • Page 6: Technical Features

    9 – TECHNICAL FEATURES PARTS: MAIN 1. Accelerator lever 2. Engine stop lever 3. Handlebar 4. Handlebar adjustment lever 5. Engine starter 6. Bumper 7. Fuel tank (see also the engine manual) 8. Driving wheel 9. Cutter set 10. Cutter hood 11.
  • Page 7 11 – DRIVING SIGNS 1. 1*and 2* speed selector 2. Tiller engagement 3. Engine stop 4. Accelerator lever 12 – TILLER WORKING WIDTH 16 cms. working width 24 cms. working width 32 cms. working width 40 cms. working width 2 unilateral knives 2 bilateral knives 2 unilateral knives 4 bilateral knives...
  • Page 8 13 – CAUTIONS BEFORE STARTING 1. Checking the engine oil level, plug “L” pic. 1; few or no oil may seriously damage the engine itself. 2. Please read carefully the use and maintenance book of the engine producer. 3. Check the handlebar’s height using the lever “B” pic. 2 4.
  • Page 9 14 – ENGINE START UP AND SAFETY DEVICES IMPORTANT! Right lever Pic. 1 Follow the instructions of the engine’s USE and MAINTENANCE booklet, too and check that the clutch is in neutral position, lever D (pic. 3). Then put the accelerator lever G in start position and the switch I in position “ON”( pic.
  • Page 10 15 - ADJUSTMENTS IMPORTANT! TILLER SAFETY GUARD pos.“C” pic. 1 The tiller has got guards that must be always fitted during the work and are foreseen by safety rules,too. Follow with close attention these rules before working with this machine. Check that screws are properly tightened before its using.
  • Page 11 16 – ENGINE STOP SAFETY DEVICE IMPORTANT! Pic. 1 Main function of lever “B”, pic.1, consists in the engine stopping when handgriff “E” is left for any reason,pic.1. Leaving lever “B”,pic.1, , switch “D” is to be pressed, closing in this way the electrical circuit and stopping the engine.

  • Page 12: Assembly And Disassembly

    18 – ASSEMBLY and DISASSEMBLY IMPORTANT! Pic. 1 The tool shaft has a hexagonal profile so that knives can be quickly fitted. Clean the tiller hubs and the tool shaft carefully lubricating it in order to make assembly and disassembly easier. -Fit tiller’s hubs “1”pic.1 into the tool holder shaft and fasten them by the tie-pin “2”...

  • Page 13: Declaration Of Conformity

    CE – DECLARATION OF CONFORMITY In compliance with CEE 89/392 regulations and subsequent changes - CERTIFICATE OF ORIGIN - MECCANICA BENASSI S.p.A , I-44040 DOSSO (FE) via Statale, 325 DECLARES, under is own responsibility, that the item called MOTORHOE Model:...

Table of Contents