Cisco ASR 5000 Series Installation And Administration Manual page 53

L-ESS Installation and Configuration
Parameter Description
Hostname for Type the host name of subdirectory created at source side. This configuration is
subdirectory applicable only for local source. In case of remote source, remote host name is
used to create directory.
Filter Type the unique string that is used to identify the xDR files to be included or
excluded based on filter list. If the filter string is provided, L-ESS will pull/push
files only with matching filter string.
For example, the include filter list can be [MIP,OCS] and the exclude filter list
can be ![ACR,NBR].
Add destination Select this option if you want to add destination to the currently configured
for current source.
source
Detach Select this option if you want to remove destination from the currently
destination for configured source.
current source
Destination Configuration
Destination Select (L)ocal or (R)emote depending on the location of destination.
Location
Destination Type the destination directory path at the destination side where xDR files are to
directory be stored. In cluster mode installation, this path should be shared path.
Create
Type (Y)es if you want to create subdirectory with host name under destination
subdirectory with
base path.
hostname
Create subdir
Type (Y)es if you want to create subdirectory under the host name directory if it
under hostname exists.
dir
Subdirectory Type the name of the subdirectory being created.
name
How should
Type (Y)es if file is required in compressed format at the destination side.
files be sent to
If you type (Y)es, the file will be compressed (if it is not previously compressed)
destination?
and then forwarded. If you type (N)o, the file will be uncompressed (if
Compressed/Dec
previously compressed) and then forwarded to destination.
ompressed
Filter string Type the unique string that is used to identify the xDR files to be included or
excluded based on filter list. If the filter string is provided, L-ESS will pull/push
files only with matching filter string.
For example, the include filter list can be [MIP,OCS] and the exclude filter list
can be ![ACR,NBR].
File prefix while Type the file prefix to be used while transferring the xDR files to the destination.
transfer
Miscellaneous Configuration
Start disk clean To enable the disk cleanup based on the disk utilization threshold level, type
up based on (Y)es. This causes the deletion of older files on disk crossing the threshold of the
threshold
Disk threshold 2 parameter until disk utilization drops below Disk threshold 1.
OL-22979-03
Cisco ASR 5000 Series External Storage Server Installation and Administration Guide ▄
Installing L-ESS Application in Stand-alone Mode ▀
Default Value
Null
Null
Null
Null
Local
Null
y
y
data
c
Null
Null
y
53