powerpack GPS-TK303 User Manual
  1. Manuals
  2. Brands
  3. powerpack Manuals
  4. GPS
  5. GPS-TK303
  6. User manual

powerpack GPS-TK303 User Manual

Gsm/gprs/gps tracker
Hide thumbs
Table of Contents

Advertisement

Quick Links

GSM/GPRS/GPS Tracker
User Manual
Preface
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly
and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual.
Any change will be integrated in the latest release. The manufacturer assumes no
responsibility for any errors or omissions in this document.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GPS-TK303 and is the answer not in the manual?

Questions and answers

Summary of Contents for powerpack GPS-TK303

  • Page 1 GSM/GPRS/GPS Tracker User Manual Preface Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release.

  • Page 2: Table Of Contents

    Contents 1. Summary ........................4 2. Applications ........................4 3. Hardware Description ..................... 5 4. Accessories ........................5 5. Specifications ......................... 6 6. Usage..........................7 6.1. Terminal Installation ....................7 6.2 SIM CARD Installations.................... 8 6.3 Turn on the Tracker Device..................8 6.4 GSM/GPS LED Indicator ..................
  • Page 3 6.25 Alarms under Arm State ..................23 6.25.1 Door alarm (Option for model C and D) ............23 6.25.2 ACC alarm (Optional for model B,C,D ) ............23 6.25.3 Shock Sensor alarm ..................23 6.26 Alarm without GSM network service (Option for model C and D ) ......24 6.27 Check the Vehicle State ..................24 6.28 Reset Hardware ......................25 6.29 Sleep Mode ......................25...

  • Page 4: Summary

    1. Summary 1.1 Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. 1.2 Features 1.2.1 Handheld and Vehicle purpose. 1.2.2 Built-in GSM, GPS antenna, compact, elegant appearance. 1.2.3 Support GPS and LBS (Location based service) double tracking solutions.

  • Page 5: Hardware Description

    3. Hardware Description GPS/POWER/GSM Indicator & ON / OFF Micro Button & USB Slot 4. Accessories This device is divided into the following four types according to the function parts: Type A: Handheld, simple function, tracking, monitoring, with home charger, no external hardness.

  • Page 6: Specifications

    Standard for Harness 3PIN type B Standard for Harness 12PIN type C/D Standard for Microphone 1.5m type C/D Standard for Relay 12V/40A or 24V/40A type C/D Optional for siren 12V/24V type C/D Optional for Fuel sensor type C/D Optional for Remote control type D 5.

  • Page 7: Usage

    Back up Chargeable 3.7V 800mAh Li-ion battery battery Storage Temp -40° C to +85° C Operation -20° C to +65° C Temp. Humidity 5%--95% non-condensing 6. Usage 6.1. Terminal Installation 6.1.1 Please ask the qualified engineers to install it. 6.1.2 Do not install it in an environment which is over GSM performance index, and please pay attention to fix the antennas in an appropriate position with good signals.

  • Page 8: Sim Card Installations

    6.1.7 Please install the SOS button on the place driver can touch. 6.1.8 Connect the GPS and GSM antenna to the right connector, and find an appropriate place and fix the antennas to make sure good reception. 6.2 SIM CARD Installations 6.2.1 Use the screwdriver accompanied with the device to open sealed buckle and insert the SIM card, the SIM card is placed correctly if heard the sound of lock, the SIM...

  • Page 9: Change Password

    For example, send SMS “begin123456” to the tracker via a cell phone, if succeeded, if will reply “begin ok”. 6.6 Change Password 6.6.1 Send SMS “password+old password+space+new password” to the unit to change the password. For example: send SMS “password123456 888888” to the unit. If succeeded, “password ok”...

  • Page 10: Single Locating

    will reply “admin ok!” in SMS. 6.7.3 Delete authorization Send SMS：“noadmin+password+space+authorized number” to delete the authorized number. 6.7.4 For roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send：“admin123456 +8613322221111” to tracker to set 13322221111 as an authorized number.

  • Page 11: Auto Track Continuously

    location. 6.9 Auto track continuously 6.9.1 Track with limited times upon time interval: Send SMS command “fix030s005n +password” to the tracker device, it will report the latitude & longitude at intervals of 30 seconds for 5 times. (s:second, m:minute, h:hour). This command set must be in 3 digits and the maximum value is 255.

  • Page 12: Automatic Update Positions Of Vehicle Turns

    6.10 Automatic update positions of vehicle turns 6.10.1 The tracker will update the positions automatically to web server once the vehicle changing driving direction over pre set angle value to form a smooth trajectory consistent with the actual road, this function is only effective in GPRS mode.

  • Page 13: Location Based Service (Lbs)

    user name and password for GPRS login.) 6.12.2 After configure the APN, send "address+password" to device, it will reply SMS including real street/address name. For example: No.113, Guankou 2nd Rd, Nantou, Nanshan district, Shenzhen, Guangdong, china. 6.13 Location based service (LBS) When the tracker device doesn’t received valid GPS signals, tracker will positioning by location based service(LBS), the messages includes the GPS coordinates of the last position in SMS mode, but the LAC in message is the...

  • Page 14: Data Logging

    and “monitor”. 6.14.2 The default mode is “track” (Track mode). 6.14.3 Send SMS “monitor+password” to the unit, and it will reply“monitor ok!” and switch to “monitor” mode. 6.14.4 Send SMS “tracker+password” to the unit, it will reply “tracker ok!” and restore to “track”...

  • Page 15: Data Load

    6.16. Data Load Current date Load: Send SMS: “load+ password” to tracker device, it will 6.16.1 reply: “load ok” if the device is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does not work under GPRS mode.

  • Page 16: Alarm Function

    number+space+code" to tracker, it will forward the code to carrier’s phone number and return the balance message received from carrier’s phone number. 6.19. Alarm Function 6.19.1 Low battery alarm Send SMS “lowbattery+password+space+on”, it will send SMS “low 6.19.1.1. battery+latitude/longitude” to authorized numbers 2 times in total in 15 minutes when voltage of battery is going to be about 3.55V.

  • Page 17: Geo-Fence

    remote controller for 3 seconds）, the tracker device will send SMS “help me!+lat./long.” to all the authorized numbers at interval of 3 minutes. It will stop sending such as alert SMS when any authorized number reply SMS “help me” to the tracker. 6.19.5 Geo-fence Set up a geo-fence for the tracker device to restrict its movements within a district.

  • Page 18: Multi-Area Management

    6.19.6 Multi-area management 6.19.6.1 Set Area Send SMS command "area+password+space+latitude,longitude+space+areaname,distanceM" to tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok". Example: Send "area123456 22.353648,113.543678 school,800M". Note: 5 areas at most and the distance between two points can't be less than the total distance in the 2 commands, and different areas can't cover each other.

  • Page 19: Movement Alarm

    name+latitude & longitude" to all the authorized phone number, and send same SMS when goes out of the area. Deactivate Multi-area management 6.19.6.5 Send SMS command "area+password+space+off" to tracker, it will reply"area off ok!" 6.19.7 Movement alarm Set up: when the unit stays immobile in a place for 3-10 minutes with 6.19.7.1.

  • Page 20: Acc Working Alarm (Option, For Model B, C, D)

    Remark: The recommended speed should be not less than 30km/h. For below that rate, it will be effected the accuracy by GPS signals drift etc. 6.19.9 ACC working alarm (Option, for model B, C, D) This function is disabled as default. To active this functions, send 6.19.9.1 "ACC+password"...

  • Page 21: Function Of Remote Controller (Option, For Model D Only)

    engine Succeed”. And it will remain immobile state until next command to resume. 6.20.2 Stop mode 6.20.2.1 Execute immediately: Send command “quickstop+password” to tracker, it will reply “quickstop OK”. Then tracker will stop the car immediately after “stop” command. 6.20.2.2Execute depends on speed(Default mode): Send command “noquickstop+password” to tracker, It will reply “noquickstop OK”, Then the tracker won’t stop the car immediately after “stop”...

  • Page 22: Silent Mode

    If the car is in ignition (ACC is at “ON” position), then the car can’t enter ARM state, reply “set up fail! pls turn off ACC”. If engine turned off, but door is open, then the car can’t enter ARM state and reply “set up fail! pls close the door”.

  • Page 23: Disarm

    6.24 DISARM 6.24.1 DISARM BY SMS Send command “disarm+password” to tracker, tracker will disarm and reply “Tracker is deactivated”, then it will turn off the alarm of door, shock sensor and ACC, and no alarms if open door, trigger shock sensor and ignition. 6.24.2 DISARM BY Remote controller (Option for model D) Press on remote controller for 0.5 seconds, the car will enter DISARM...

  • Page 24: Alarm Without Gsm Network Service (Option For Model C And D )

    6.25.3.2 Shock sensor sensitivity configuration: The sensitivity of the built-in shock sensor has three different level: First level: Alarm will be triggered after detect slight vibration, send command" sensitivity+password+space+1" . Second level: Alarm will be triggered after detect 8 times vibration in 2 seconds, send command"...

  • Page 25: Reset Hardware

    Battery: 100% GPRS: ON/OFF GPS: OK/NO GPS ACC: OFF/NO Door: OFF/NO GSM Signal: 1-32 The higher digit it shows; the stronger of GSM signals it receives. Oil: 70% 6.28 Reset Hardware Send SMS “reset+password” to tracker device, it will reply “reset ok”. And the GSM module and GPS module in the tracker will be reset.

  • Page 26: Sleep By Shock Sensor

    6.29.2 Sleep by shock sensor Send SMS command "sleep+password+space+shock"to tracker device, tracker will reply "sleep shock ok", it will enter sleep mode if no shake is detected or ACC is off , GPS module shuts down, LED will be off . Shake or any operation can awake the tracker .

  • Page 27: Tcp / Udp Switch

    6.32 TCP / UDP Switch Send command: "gprs+password,0,0" switch back to TCP mode, this is the default mode. Send command:"gprs+password,1,1" switch to UDP mode. 6.33 Configure parameters by USB Connect the gps tracker to computer with the optional USB cable ,find gps tracker’s internal memory and open serial debugging tool in the format of text , refer to the instructions for more operations .

  • Page 28: Gprs User Id And Password Setup

    OK” is returned by the tracker in SMS. Notes: 123456 refer to password of tracker and CMNET is the APN of China Mobile (One of GSM Operator in China). 6.34.2 GPRS User ID and password Setup In most countries, the user name and password involving GPRS login 6.34.2.1 are not compulsorily necessary, therefore, the entry can be skipped.

  • Page 29: Less Gprs Traffic

    6.35 Less GPRS traffic Tracker will change to less GPRS traffic mode after parking 5 minutes, 6.35.1 GPRS disconnect and connect again when alarm being triggered or vehicle starts driving. Activate this function: Send "less gprs123456 on", tracker will reply "less 6.35.2 gprs on ok".

  • Page 30: Web Platform And Pc Installation Tracking Software User Manual

    6.37.2 Cancel: Send “nocenternum+password” to tracker, it will reply “no center num ok”. 6.38 Web platform and PC installation tracking software user manual Web based platform www.gpstrackerxy.com. Configuration IP: 6.38.1 202.104.150.75 Port: 9000. Please check “software platform user manual” included in the CD for detailed operation information. based installation tracking software user manual included in the CD in 6.38.2 PC package.

  • Page 31: Faults & The Solutions

    destroy the product. 8. Faults & the Solutions Faults Solution Fail to turn on Please check out the power wiring in correct place. Please make sure SIM Card is GSM Net and installed correctly; also call No GSM Signal display should be on; but no call transfer and PIN code off. A more open view of the sky is recommended to make sure the device No GPS Signal can receive the GPS signal normally.

Table of Contents

Save PDF