Veermount Technology TeleHawk 3 Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

V eermount Technology Limited

TeleHawk3

Door entry system

INSTALLATION MANUAL

IMPORTANT NOTE.

Long term system reliability and low maintenance costs can only be realised if the panel is installed competently and as

detailed in this manual. Veermount Technology Limited Ltd will not accept liability for any problems arising from non-

compliance with the information as contained in this document.

Veermount Technology Limited

15, Ancaster Crescent,

New Malden,

Surrey

KT3 6BD

Tel: 0208 241 6161

email: sales@veermounttechnology.co.uk

Table of Contents

Need help?

Do you have a question about the TeleHawk 3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Veermount Technology TeleHawk 3

Page 1: Installation Manual
Long term system reliability and low maintenance costs can only be realised if the panel is installed competently and as detailed in this manual. Veermount Technology Limited Ltd will not accept liability for any problems arising from non- compliance with the information as contained in this document.
Page 2: Table Of Contents
TeleHawk Veermount Technology Installation manual INSTALLATION MANUAL Contents Overview Installation & wiring Programming the TeleHawk2 Telephone circuit requirements Simple guide to operation Methods of access control Statutory information Page 14 pages Ref: Docs/Manuals/TeleHawk3 Issue 2.0 December 06...
Page 3: Overview
TeleHawk Veermount Technology Installation manual Overview TeleHawk3 is a security door entry system that utilises a telephone line to connect the point of entry to the required person ( via a telephone number – including mobiles). For convenience, within this document, the required person is...
Page 4: Installation & Wiring
TeleHawk Veermount Technology Installation manual Installation and wiring The control panel is designed for setting into (Flush mount), or fixing onto (surface mount), a brick or stone type structure. The Power and Termination Unit needs to be set inside the building and within 100 metres (cable run distance) of the control panel.
Page 5 TeleHawk Veermount Technology Installation manual CONTROL PANEL MOUNTING The control panel should first be removed from its back box using the correct screw spinner for the security screws (available from Veermount if required). The back box requires four plugged holes to be set into the wall (surface mount version) or a cavity cut into the wall (flush mount version) followed by the four plugged holes as for the surface version.
Page 6 TeleHawk Veermount Technology Installation manual Connections from panel to the PTU To panel To external To external To panel +12v +12V Fuse 1A - SLO BLO T/switch Cable 1 Pr 4 Cable 2 Pr 1 +12v +12v Cable 1 Pr 3...
Page 7 TeleHawk Veermount Technology Installation manual The connections to the external 'outside world' should be made to the inner sides as indicated by the identification labels set under the blocks and as shown above. Right hand block: TELE LINE. (See detailed telephone line requirements in the next section).
Page 8 TeleHawk Veermount Technology Installation manual The PTU should be checked and the installed cables secured against physical movement and damage and then the cover replaced. Note that there is a micro-switch assembly at the top right of the box which may be used for unauthorised entry alarm if required.
Page 9: Programming The Telehawk2
TeleHawk Veermount Technology Installation manual 3. PROGRAMMING THE TELEHAWK3 General The unit is programmed by using DTMF tones from an external telephone or via the keypad and display screen. Note that a number of different sounds are generated by the TeleHawk to indicate various information. In the following text those sounds are described in a way in which they can be recognised by the programmer.
Page 10 TeleHawk Veermount Technology Installation manual 1 # 123 # 123 # 861864 # 456 # 861865 ∗ This sets a new flat number 123 with a door PIN of 123, phone number 861864, gate PIN of 456 and a second phone number 961965.
Page 11: Telephone Circuit Requirements
TeleHawk Veermount Technology Installation manual 4. Telephone circuit requirements LINE REQUIREMENTS TeleHawk3 is designed to be connected to a single analogue telephone line. This can be a dedicated, ex-directory PSTN line or a PABX extension line. NOTE : The system will not work with digital exchanges unless connected to a specially provided analogue port, supplied by the PABX manufacturer.
Page 12: Simple Guide To Operation
TeleHawk Veermount Technology Installation manual Simple guide to operation Control panel At the control panel follow the instructions on the display: Basically enter the required number followed by SUBSCRIBER CALL Once the is called the TeleHawk3 rings the programmed number for that...
Page 13: Methods Of Access Control
Method 5: TeleHawk3 may also be fitted with an integrated PAC reader, enabling access to be granted on presentation of an authorised electromagnetic ‘key’. This facility is external to the TeleHawk 3 system, although it may be physically integrated into the panel.
Page 14: Statutory Information
TeleHawk Veermount Technology Installation manual Statutory Information The approved item consists of the TeleHawk3 panel assembly, which constitutes a hands free telephone call point to a series of pre-programmed telephone numbers together with the associated Power and Termination Unit. The TeleHawk3 apparatus is approved for connection to analogue speech circuit equipment approved under section 16(1) of the British Telecommunications Act (1981) and as designated by the Secretary of State under section 22(6) of the Telecommunications Act of 1984.
Page 15 TeleHawk Veermount Technology Installation manual FAULT DIAGNOSTIC SHEET Problem Check Comments Can't call into the panel to program it The correct telephone line number is The line must be capable of both way being used. calling - i.e. both setting up and (See also 'dead panel below) receiving calls.
Page 16: Declaration Of Conformity
TeleHawk Veermount Technology Installation manual Declaration of conformity Veermount Technology Ltd We : 15, Ancaster Crescent, New Malden, Surrey KT3 6BD Declare under our sole responsibility that the product: Name: TeleHawk Door Entry system to which this declaration relates is in conformity with:...