WEEE Notice This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery.
Notice Please use the authorized charger only. Never disassemble or attempt repair of this product. Doing so may damage the DVR, cause electric shock and void your product warranty. Never short-circuit the battery. Exposing the DVR to open flames can cause explosion. Due to local laws and vehicles safety considerations, do not manually operate the device while driving.
Features -2 channel detached cameras -2.7” LCD color screen -140 degree wide angle lens with full glass lens -Front cable 3 meters and back cable 6meters -Motion detection -Automatic emergency recording for collision detection- Supports micro-SD up to 64GB (Class 10) -LDWS (Lane Departure Warning System) and FCWS (Forward Collision Warning System) -AV out to the car monitor...
Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately. DVR holder DVR unit Back lens Front lens 4.8V ~ 30V AV out cable USB cable Wired control* Charging cable Cable clips*16 3M pad User manual...
to protect file. Product Overview Description Description Cam1(Front) Cam2(Back) Record | OK GPS | Wired control HDMI Power | AV OUT USB for computer Reset Card slot Menu Back cover Mode Speaker...
Down Power Getting Started Inserting the Memory Card Insert the memory card with the gold contacts facing the front of the DVR. Push the memory card until it clicks into place. To remove the memory card, push to eject the memory card out of the slot.
Installing in Vehicles Please refer to the quick installation. 2.2.1 Mount the lens 1. Attached the lens to your window using the sticker. 2. Rotate and tilt the lens to the right position. 2.2.2 Mount the device 1. Hide the DVR inside your car. Or mount it on your windshield with the suction cup.
Page 11
Note: 1. The yellow LED lights up while the battery is charging. 2. Please take note if the environment temperature reaches 45° C or above, the car adapter still can supply power to DVR, but it will not charge the battery.
Page 12
To turn off, press and hold the POWER button for at least 2 seconds. 2.2.5 Initial Settings Before using the device, we recommend you to set up the correct date and time. Set the Date and Time To set the correct date and time, do the following in standby window: 1.
5. Repeat step 4 until the date and time setting is complete. Press [OK] *If you use with GPS module, after you set the time zone and device gets signal, you will get the correct local time immediately. Using the Car DVR 2.3.1 Recording Videos Record videos while driving When the vehicle engine starts up, the DVR automatically turns on and...
Page 14
card is full, the oldest file in the memory card is overwritten. See Using the Menu. Emergency Recording During Video Recording, press the wired control to enter emergency recording mode the [ ] icon will be shown immediately on the upper center of the screen, and the recorded file will be protected.
Page 15
Sign Description 1920×1080 Indicates the video resolution. Motion detection GPS. Blinking for searching. Green for stable signal.(only after connecting GPS) Mute recording Micro SD card Battery 2014/09/23 Date(Year/Month/Date) 00:25:15 Remaining recording time 12:03:17 Current time...
Page 16
000:00:27 Recording time Car ID Car ID. How to set, please check menu. 2.3.2 Playback Videos If recording is in progress, press the [Record] button to stop recording. The standby screen is displayed. Playing videos 1. in the standby screen.
Page 17
2. Press[Menu] twice to enter into video playback list. 3. Press the [▲] [▼] button to browse for the desired video file and press the [OK] button to play the video. Press the [OK] button to pause the playback. Press it again to resume. 4.
Page 18
Tips: you can play all videos continuously. After select one video, hold menu button and choose “Video play all”. 2.3.3 Deleting Files To delete or protect file(s), do the following From the video standby or photo standby window: 1.Press[▼]button to enter into video list 2.Press[▲] [▼] button to select file.
Page 19
From video file name: cam1 means the front cam, while cam2 means the rear cam. The stamp structure on the video: C1 +038.9734 +56.14117 115Km/h 096° 2014/08/30 20:45 CARID...
Page 20
2.3.5 GPS Player How to use it: 1: Press the “+” to add video to play list. (Window 5 of picture above) Or if DVR is connected to computer, it will detect video files automatically. 2: Hit play button in window 3. Information explain: 1: Title: here is the key information about this video.
2. Video 3. Here you can find the direction, G-Sensor and speed 4. GPS route. You can choose different built-in maps. 5. File tools and video list. Tips: a). There will be a player inside the root folder of your SD card.
Page 22
laws. When it works, you will get warning of the coming speed cam. 2.4.2 How it works? First it gets the GPS signal, and then compare it with the internal database. If the data matches, then it will send out the warning before 500m. The warning is voice, it will tell the speed cam type.
Connect your DVR to computer, name your new database file to “gpsdb.txt”. Put this txt file under the root of the card. Turn on the device, and it will update automatically. After successfully updating, this file will disappear which you can connect the card to computer to check. *The speed cam warning screen may differ from different firmware, please make sure you get the latest one.
3.1.2 System settings Press the [Mode] button to enter system settings. For each of these 2 pages settings, you can do the following: Press [▲] [▼] button to select settings and press [OK] to enter. Press [▲] [▼] button to select the right options and press [OK]. Repeat step 1, 2 until finish all setups.
Page 25
3.2.1 Video settings Menu Description Options Set the video Resolution 1920x1080 30P 16:9 resolution of 1280x720 30P 16:9 both cams Set the video Video quality S. Fine (Super Fine) quality Fine Normal Software video On/ Off boost Turn on or off Stamp On/Off (cannot...
Page 26
To set the back SEC stream 1920x1080P cam resolution to 1280x720P save space 3.2.2 System settings Menu Description Options Set date and time Date/Time Format: Year/Month/Date; Hour: Minute ([Mode] to move right; [OK] to confirm) Set your car ID Car ID 1.
Page 27
number which can ENG/CHS/RUS show on the video. characters; 2. Use [▲] [▼] to move left and right; 3. Use [Mode] to go down 4. Press [OK] button to input each character 5. Choose backspace if to replace old characters. 6.
Page 28
detection. The sign will blink. 3. After detected objects, it will start recording. Set how long to turn OFF/30sec/1min/3min off the screen time Set how long will be Split time 1,2,5,10min each video file Please note it is cycle recording. New files will replace the old ones.
Page 29
/Portrait/Sunset/Sand/ Snow/Flower/Firework/ Water/Backlight/Tripod/ Blue Sky/Macro/Arena Set the EV exposure AE BIAS Set from [-2.0] to [2.0] adjustment Use [▲] [▼] to move left and right. Set to flip the videos Video flip Both lens | cam1 lens | from the two lens cam2 lens | OFF The GPS speed will Set from 20 –...
Page 30
moving, it will start 30minutes. If you use recording again. external power, make sure it is 2A output. And if you connect to car battery directly, make sure you have an equipment to protect your battery. If don’t press the Screen ON/ OFF buttons for several...
4. Specifications Item Description Image sensor 1/2.7” 2M CMOS Sensor Effective pixels 1920(H) x 1080 (V) up to 64GB class 10 Storage media 2.7” LCD color TFT LCD screen Lens 160° Wide Angle Fixed Focus lens F2.0, f=2.8mm Focus range 1.5m~ Infinity...
Page 32
Max resolution Each channel: 1920 x 1080 30fps Shutter Electronic shutter Auto:1/2 ~1/2000 sec. Optional G-Sensor 3-Axis G-Force sensor Auto White balance Auto Microphone Speaker Interface Mini USB, Mini C Type HDMI Battery 1100mAH Li-Po rechargeable Operating Temperature -10° ~ 60° C Operating Humidity 20 ~ 70% RH Storage Temperature...
Need help?
Do you have a question about the K1S and is the answer not in the manual?
Questions and answers