Installing The Wifi Terminal - Ingenico iWL200 series User Manual

6.

Installing the WiFi Terminal

• Ensure the mains supply is connected to the terminal and switched off
• Ensure you have your Merchant ID to hand. This can be found in your Welcome Letter
• Place the terminal handset onto the base if you have not already done so.
Key in your Merchant ID and press the GREEN ENTER button. Once the Merchant ID has been
entered, the terminal will start the WiFi connection set-up.
On the CONFIGURATION screen, scroll down using the
arrow keys, highlight the WiFi Setup option and press the
GREEN ENTER button.
Select PROFILES on the next screen and press the
GREEN ENTER button.
Select NEW PROFILE to create a new profile for the
desired network and press the GREEN ENTER button.
Highlight the Manual Connection option and press the
GREEN ENTER button.
The access point for the network will be either visible or hidden. On the HIDDEN ACCESS POINT
screen, select the appropriate option and press the GREEN ENTER button. If it isn't known
whether the network is hidden or not, this can be established by scanning the available networks
using another mobile device with wireless capabilities such as a smart phone, tablet or laptop. If
the desired network is displayed amongst the available networks, this indicates that the network
is not hidden and the 'NO' option should be selected. If it isn't displayed despite being active, this
suggests that the network might be hidden and the 'YES' option should be selected.
On the ESSID ENTRY screen, key in the name of the network. A virtual keyboard will be activated
by pressing the MENU button which will make it possible to facilitate the entry of non-numeric
characters using arrow keys. To select capital letters press the right or left arrow key. Once the
entry of the network name is completed press the GREEN ENTER button.
Please Note: this field is case sensitive.
On the SECURITY TYPE screen highlight the HOME
SECURITY option and press the GREEN ENTER button.
The next screen displays the encryption method options,
highlight the 4-WPA / WPA2 option and press the GREEN
ENTER button. For PCI-DSS compliance the WiFi
network must use the WPA encryption protocol.
Enter the WiFi password on the WIFI PASSWORD
screen and press the GREEN ENTER button. The virtual
keyboard can be activated by pressing the MENU button.
Please Note: this field is case sensitive.
Key in '1' for PRIORITY level and press the GREEN ENTER button. The Wi-Fi network is
automatically selected according to its visibility and priority value entered on this screen. When
more than one profile is configured with priority set as '1', the signal strength will determine which
profile is to be used.
The set-up is now complete. Press the RED CANCEL button a few times and allow some time (up
to a minute depending on the signal strength) for the terminal to attach to the newly configured
WiFi network. The icons at the top of the screen will indicate the connection status of the terminal.
Page 8
CONFIGURATION
Base Update
Display
WiFi Setup
CONNECTION METHOD
Automatic Scan
Manual Connection
SECURITY TYPE
Home Security
Enterprise Security
CYPHER
None
WEP64
WEP128
WPA / WPA2