Table of Contents
Advertisement
TV Aerial: Status type
Before you begin, look around for other TV aerials, and note which way they are pointing, and
whether the bars on the aerials are horizontal or vertical.
The aerial is adjusted from inside the wardrobe.
Unscrew the big white finned nut (red arrow) to allow the aerial to be raised and then turned to
face the same way as other aerials nearby. A red dot on the shaft is aligned with the front of the
aerial.
If nearby aerials have vertical bars, turn the handle anti-clockwise (green arrow) to rotate the
aerial into the vertical position. This handle is rather fragile, but can usually be clicked back into
place if it comes off in your hand.
If you have moved since last using the TV it will probably need re-tuning to the local transmitter.
(See TV manufacturer's instructions).
You must lower the aerial before travelling, and point it towards the rear; otherwise tree
branches may damage it.
TV Aerial Amplifier
Make sure that the TV amplifier is switched on and the red light
is showing. Move the right hand switch to the left.
The left hand switch is normally set to the right, but can be slid
left if the signal is very weak.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Escape 664 and is the answer not in the manual?
Questions and answers