Table of Contents
Advertisement
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Fujitsu B23T-6 LED
Summary of Contents for Fujitsu B23T-6 LED
- Page 1 Display Operating Manual B23T-6 LED Downloaded from ManualMonitor.com Manuals...
- Page 2 Should you have any technical questions, please contact: • Our Hotline/Service Desk (see the Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your authorized distributor • Your sales office We hope you really enjoy using your new Fujitsu system. Downloaded from ManualMonitor.com Manuals...
- Page 3 Downloaded from ManualMonitor.com Manuals...
- Page 4 Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26361-K1388-Z320-1-7619, edition 2 Downloaded from ManualMonitor.com Manuals...
-
Page 5: Table Of Contents
B23T-6 LED Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification Downloaded from ManualMonitor.com Manuals... - Page 6 All other trademarks used in this document are trademarks or registered trademarks of their respective owners and are recognised as being protected. Copyright © Fujitsu Technology Solutions GmbH 2010 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, either in part or in whole.
- Page 7 DisplayPort socket ..............36 Fujitsu Technology Solutions...
- Page 8 Contents Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 9: Your Lcd Screen
Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 10: Further Information
"CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g: MENU indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 11: Important Notes
Use a screen saver with moving images and activate the power management for your monitor to prevent still images from "burning in". • If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 12: Power Cable
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 13: Ce Marking
1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Contact: Henning, Bernd "http://recycle.epa.gov.tw" Phone No.: (408) 329-6737 Fax No.: (408) 746-8299 Information on this subject is also available on the Internet at "http://ts.fujitsu.com/recycling". Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 14: Getting Started
► Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 15: Setting Up The Device
Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 16 Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter "Removing monitor base", Page Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 17: Mounting The Monitor Base
► Insert the base plate on the foot (1). ► Guide the screw through the opening (2). ► Secure the base plate with the screw (3). ► Place the monitor in operating position. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 18: Adjusting Height
The inclination of the monitor can be adjusted by -5° (forwards) and +35° (backwards) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 19: Removing Monitor Base
VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or wall bracket, please see the documentation for the swivel arm or wall bracket. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 20: Connecting The Device
8 = USB IN (Downstream) 4 = Display Port (DP) socket 9 = USB OUT (Upstream) 5 = DVI-D socket (DVI) ► Remove the cover. ► Select the appropriate data cable for your computer. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 21: Connecting Cables To The Computer
► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 22: Operation
Monitor is not receiving a video signal or is in power saving mode. does not light up Monitor is switched off. ► Switch the device on again with the ON/OFF switch (1). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 23: Notes On Power Management
Once an input is made at the computer the screen contents are restored. For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 24: Changing The Monitor Settings
If the OSD menu is not activated, you can make the following settings directly: 1 = Buttons for the OSD menu (On 3 = Power supply indicator Screen Display) 4 = Softkeys 2 = ON/OFF switch Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 25 ON/OFF switch. The message OSD locked / unlocked is displayed. Please proceed in the same manner to release the locked OSD menu again. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 26: Changing The Monitor Settings Using The Osd Menu
Changing the monitor settings using the OSD menu With the buttons on the control panel, you can call up and use the integrated OSD (On-Screen Display) menu. The English menu names are used in the following description (default setting). Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... - Page 27 (e.g. Image adjust). INPUT ► Press the MENU button to select the highlighted icon. The Image adjust settings window is displayed. ► Press the AUTO button to exit the main menu. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
- Page 28 If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...
-
Page 29: Osd Menu Functions
With this function you move the picture up or down. Adjust the picture size Expansion Full screen = selection of full screen mode Keep aspect = maximum picture size without distortion (only for PC image) Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 30: Adjusting The Volume
With this function you switch the OSD menu from portrait mode to landscape OSD Rotation mode and vice versa. On = The OSD menu is displayed in portrait mode. Off = The OSD menu is displayed in landscape mode. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 31: Displaying Information
Press the button to activate the function. The message Auto Processing is displayed. Displaying information Call the Information setting window This function displays the model designation, serial number, resolution, H/V frequency and ECO mode. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 32: Notes On Ergonomic Colour Adjustment
+ Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 33: Troubleshooting
Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you cannot solve the problem, please contact our Service Desk. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 34: Troubleshooting
The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced. ► Contact our Service Desk. Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 35: Explanatory Information About Standard Iso 9241-307
The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. -
Page 36: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B23T-6 LED Dimensions and weight Visible diagonals 57.6 cm Dot pitch 0.2652 mm Image size Width 509.2 mm Height 286.4 mm... -
Page 37: Vesa-Ddc-Compatible Vga Interface
75 Hz 1024 x 768 64.0 kHz 60 Hz 1280 x 1024 65.0 kHz 60 Hz 1680 x 1050 67.6 kHz 60 Hz 1920 x 1080 80.0 kHz 75 Hz 1280 x 1024 Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 38: Sub D Port
Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 39: Dvi-D Port
TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals... -
Page 40: Displayport Socket
Lane 0 (negative) Earth Lane 0 (positive) Connected to earth Connected to earth Auxiliary Channel (positive) Earth Auxiliary Channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu Technology Solutions Downloaded from ManualMonitor.com Manuals...