Motorola DCH200 Installation Manual page 26

Hide thumbs Also See for DCH200:

Table of Contents

4 DIAGNOSTICS

3. When the desired new frequency has been selected the operator will press the

SELECT key to start the search. The manual frequency search will last up to 40

seconds. On the OSD the "MANUAL FREQ" line of text will be cleared, the

"HUNT MODE" will display "FIX" to indicate a search on a fixed frequency, and

the "CUR FREQ" field will change to the frequency being searched for.

4. If the frequency is found with the proper EMM Provider ID then the OSD "LKC"

field will change to display the new frequency.

5. If after 40 seconds the frequency search is not successful the product will

perform a warm reset and return to the last known carrier frequency.

6. If the operator would like to abort a search without waiting the 40 seconds, the

POWER key can be pressed to cause an immediate warm reset.

Table of Contents