Related Manuals for ONE Technologies AluDISC 3.0
Summary of Contents for ONE Technologies AluDISC 3.0
- Page 1 ONE Technologies AluDISC 3.0 SuperSpeed Notebook Kit USB 3.0 3.5“ Hard Disk Drive with ExpressCard USB 3.0 Controller User Manual...
- Page 2 Contents: I. Package Contents II. Features III. Technical Specification IV. Card Hardware Installation V. Software Driver Installation VI. Hardware Connection VII. Unplugging Hardware I. Package Contents * USB3.0 ExpressCard/32 host adapter * 3.5” Disk Drive * Enclosure Stand * USB 3.0 Cable * Power Adapter * User Manual II.
- Page 3 - Power: External Adapter Input: 100-260V Output: 12V/2A - Product Dimension: 192(L)x 122(W)x 31(H)mm - PC Requirement: Intel Processor 350 MHz, 512 MB RAM Windows 2000/XP/Vista and Windows 7 Operating System (Note: No Driver needed for Windows 7) USB 1.1/USB2.0/USB3.0 Host ports...
- Page 4 IV. Card Hardware Installation If your Notebook Computer is not yet equipped with USB 3.0 ports you can use the bundled ExpressCard Controller to upgrade it. To install the ExpressCard simply plug it into the ExpressCard slot of your notebook! V.
- Page 5 3. Select [I accept the terms of license agreement], and click [Next] to continue. 4. Then select the default option icons to continue setup. Till the setup wizard finish installing the device, click [Finish] to exit the wizard.
- Page 6 VI. Hardware Connection 1. Make sure your computer is operational. 2. Connect the power cord. (Now the LED indicator is off) 3. Connect the enclosure to the computer with USB 3.0 cable. Now the LED activity indicator is on, and the hard disk starts spinning up. Connecting to a USB2.0 host port will work but yields lower performance.
- Page 7 Note: Do not unplug or remove the device when the HDD LED is on or blinking. Please also check our website www.one-technologies.com for driver updates and useful information and additional help files. ONE Technologies is not responsible for any loss of data! © 2009 ONE Technologies GmbH...
Need help?
Do you have a question about the AluDISC 3.0 and is the answer not in the manual?
Questions and answers