Advertisement
MODEL C REPAIR PARTS LIST AND OWNERS MANUAL
Never attempt to work on your Jari Mower without first removing the spark plug or wire from spark plug. Never
wear loose clothing near the unit when the engine is operating. Before starting the engine, clear the area of adults,
children and pets. A sudden gust of wind and/or an unexpected move on somebody's part can change what was a safe
situation. Always exercise caution during the operation, handling, parking or storage of your mower. Shutting off and
allowing engine to cool is necessary before refueling. Stop engine before attempting to clean any debris from knife assembly.
Use heavy-duty gun grease every 3 hours of operation. If one grease retainer, such as item #39 used in conjunction with
part requiring grease, grease until grease appears at the retainer. If two grease retainers are used, such as with each
wheel or dual pulley #59, grease until grease appears at both retainers. It is not necessary to remove fender for greasing.
Drive shaft has sealed ball bearings, which do not require greasing.
Jari Serial Number: (located on frame under engine)
Date Purchased:
Engine (2 numbers located on engine in form of decal and/or
stamped into flywheel housing)
Make:
MONARCH
Serial No. 93878 and later
CAUTION
LUBRICATION (5 Zerks)
H.P.:
Jari Mowers, LLC
54456 Gadwall Rd.
Mankato, MN 56001
Phone: 507-625-3340
Fax: 507-388-3973
Email: info@jarimowers.com
www.jarimowers.com
Advertisement
Table of Contents
Summary of Contents for Jari Monarch
- Page 1 CAUTION Never attempt to work on your Jari Mower without first removing the spark plug or wire from spark plug. Never wear loose clothing near the unit when the engine is operating. Before starting the engine, clear the area of adults, children and pets.
- Page 4 10.Check unit over for adequate lubrication – See front page. TO START ENGINE 1. Read engine manual and fill oil as instructed. 2. Your Jari Monarch is equipped with a sickle bar handle lever #52 for your convenience in starting the engine.
-
Page 5: Belt Replacement
SPEED See speed information under mowing tips also. If your Monarch is equipped with a 4” O.D. engine pulley used for general purpose mowing and you find the unit moves too fast for your mowing conditions, you can purchase locally a 3” O.D. a groove engine pulley of equal grade along with a 29”... -
Page 6: Winter Storage
2. It is not necessary to use the full throttle setting provided on your Jari. Generally, ¼ to ¾ speeds is adequate to cut whatever is at hand. Start with ¼ speed and if engine lugs, gradually, increase speed to point where engine does not lug. - Page 7 Jari Mowers, LLC 54456 Gadwall Rd. Mankato, MN 56001 Phone: 507-625-3340 Fax: 507-388-3973 Email: info@jarimowers.com www.jarimowers.com...
Need help?
Do you have a question about the Monarch and is the answer not in the manual?
Questions and answers
where can I order part 105910