Software Installation And Settings - Kenwood TS-480HX Setting Manual

4.6. Software Installation and Settings

Install the software required for KNS operations on the host station PC and the remote
station PC, and then perform the required settings.
● Host station PC
Download and install the ARHP-10 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
Make the COM port settings used to connect to the TS-480, network settings, optional
settings, and user settings by selecting the "Control" menu and then "Setup" in the
ARHP-10. For the settings methods, refer to the ARHP-10 help file.
Download and install the ARVP-10 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
The ARVP-10 is included with the ARVP-10H for the host station and the ARVP-10R for
the remote station.
● Remote station PC
Download and install the ARCP-480 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
In the ARCP-480, select the "Control" menu and then "Setup", and set the connection to
"Use Network Command System". Click the "Setting" button to make the "KNS connection
settings". For the settings methods, refer to the ARCP-480 help file.
Download and install the ARVP-10 onto the PC from the Kenwood website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
The ARVP-10 is included with the ARVP-10H for the host station and the ARVP-10R for
the remote station.
Caution:
 For audio transmissions, this can replace it with general purpose VoIP software as
well as the ARVP-10. Refer to the VoIP software for details.
 Support for selecting, installing, and operating VoIP software is not available from
JVC KENWOOD Corporation.
15