Connecting To Mains Power; Turning Scale On/Off; Cleaning - OHAUS Aviator 5000 Operator's Manual

2.5
2.6
2.7
10
Operator Manual Aviator 5000
OHAUS

Connecting to mains power

The power supply is stored in a department under the scale to support
save transport.
1. Connect the supplied power supply unit to the power connection
socket on the underside of the scale.
2. Plug the power supply unit into a correctly grounded power outlet.

Turning scale on/off

 To turn the scale on press the On/Off key.
 To turn the scale off press and hold the On/Off key until a long beep
can be heard.
• After the scale is turned on, it runs through a short display test. All
segments and status messages briefly light up, the software version
is displayed.
• The scale is ready when the weight display appears.

Cleaning

CAUTION
Damage to the scale
 Turn off and unplug the device before cleaning.
 Do not open the device.
 Make sure that no fluids get inside the device.
 Do not use scouring powders or plastic dissolving cleaning agents
for cleaning.
Cleaning
 Remove the weighing pan and clean it with a commercially available
household detergent.
 If heavily soiled, clean the surface of the device with a damp cloth
that has been dipped in water containing a mild liquid detergent
and well wrung out.
Order number 72246393 12/10