Related Manuals for Orchid LR7610
Summary of Contents for Orchid LR7610
- Page 1 ECO LOW RADIATION DECT Telephone User Guide LR7610 / LR7620 / LR8610 / LR8620T LR7610T Duo / LR7620T Duo / LR8610 / LR8620T Duo...
- Page 2 Congratulations on purchasing Orchid’s Low Radiation multi-handset DECT Cordless Telephone system. DECT stands for “Digitally Enhanced Communications Technology” your phone is designed to offer secure, crystal clear digital telephone calls with the ability to use up to six handsets.
-
Page 3: Table Of Contents
Contents Introduction ............8 Transmission output from the base station when in use . - Page 4 Handset setup ................. . 24 Handset ringer settings .
- Page 5 Important Notices ........... . . 36 Appendix .
-
Page 6: Safety Instructions
- attempt to disassemble the charger, base station or handset(s). - use any other batteries other than the ones supplied with your phone or recommended by Orchid. Power requirements This product requires an electrical supply of 220-240 volts AC. In the case of power... - Page 7 Your phone - What’s in the box ��� ��� ��������� �� �������������� � ������� Base station Telephone Handset Telephone Charger (note LR8610 illustrated) Stand Telephone handset Power supply for Power supply for belt-clip telephone charger stand base station Rechargeable batteries Phone line cord Headset Connect base station to your...
-
Page 8: Introduction
If the handset senses that it’s close to the base station when making or receiving a call your Orchid phone automatically reduces its power level by up to 75%. There is also a power level option switch on the base station that permanently reduces base the transmission power by up to 75%. -
Page 9: Rols
Telephone Handset Control A. Receiver outlet B. Phone LCD Display Panel C. Soft buttons (Functions change according to description on LCD display) D. Scroll buttons to navigate menus and icons This button can be used to activate intercom function. This button can be used for accessing the incoming caller list. -
Page 10: Display Icons On The Handset
Display icons on handset Indicate Battery level Indicates that handset is locked. Indicates the phone is operating efficiently in low radiation mode. Handset is close to base. Indicates the phone is in normal power mode. LR7620T/LR8620T answer phone message LR7620T/LR8620T answer phone message Message access key. -
Page 11: Base Station/ Charger Controls & Connections
Red ‘in use’ LED ��� ��� ��������� �� ��� ��� ��������� �� �������������� � ������� �������������� � ������� Page button Page button LR7610/LR7610 Duo/LR8610/LR8610 Duo LR7620T/LR7620T Duo/LR8620T0/LR8620T Duo Base station controls Base station controls Telephone line Automatic - Low Delete Volume F. Forward... -
Page 12: Getting Started
Getting started Telephone connection 1. There are two different power adaptors supplied with your phone one for the Base Station and one for the telephone charger stand (more if you have a multi- handset model). You will recognize the Base Station Power Adaptor as it has the larger jack plug on the end of the lead. -
Page 13: Battery
Please note! To minimize the risk of interference do not position the base station in very close proximity to other electrical equipment such as televisions, VDUs, other telephones, fans, etc. This will minimize the risk of interference. Do not place the base station in areas where it will be exposed to direct sunlight or other major heat sources. -
Page 14: Using The Telephone
Using the telephone Making calls 1. Enter the required telephone number (max. 20 digits). If you enter wrong digits, press button to clear it. 2. Press button. The number is dialed. 3. End the call by pressing button or place the handset on the charging stand. -
Page 15: Switching On The Speakerphone
Switching on the Speakerphone. You can switch on the speakerphone during a telephone call for handsfree operation. 1. Press the [SPK] button during a call. 1. Press the [SPK] button during a call. appears appears on the display. Now you can talk in speakerphone. -
Page 16: Setting The Speaker Volume / Receiver Volume
Setting the speaker/receiver volume The speaker/receiver volume can be set during a telephone call using the arrow telephone call using the arrow telephone call using the arrow buttons of the buttons of the buttons of the handset. The volume can be increased or decreased by pressing the buttons at any time during a call. -
Page 17: Phone Book
Phone book Using the phone book Each handsets phone book can independently store up to 200 entries with up to a 20 character name and 20 digit telephone numbers. Note phone book entries cannot be shared between handsets. If a telephone number is stored, the call can be activated at the push of a button. Storing a name/number 1. -
Page 18: Button Configuration
Button configuration Button Letter / Symbol [Space] 1 A B C a b c 2 D E F d e f 3 G H I g h i 4 J K L j k l 5 M N O m n o 6 P Q R S p q r s 7 T U V t u v 8 W X Y Z w x y z 9... -
Page 19: Calling From The Phone Book
Calling from the Phone Book. 1. Press the [Names] button and the phone book records appears in alphabetical order. 2. Press buttons to locate the desired telephone numbers to be dialed. 3. Press the button, the selected number will be dialed automatically. Note: To save you having to search through the Back entire phone book, you can use the search function. -
Page 20: Deleting An Entry From The Phone Book
Setting the phones time & date Your Orchid phone is equipped with a built-in clock that is used to record the time and date of calls when the caller ID. It is also needed for answer phone function (if applicable) for the LR7620T/LR7620T DuoLR8620T/LR8620T Duo model. -
Page 21: Caller Identification
Caller Identification How it works Caller Identification is a service that you may subscribe to from your network provider. If you have subscribed to the service and provided that the identity of the caller is not withheld, the number of your caller will be displayed (if the number is withheld then ‘Private’... -
Page 22: Deleting An Entry From The Callers List
Deleting an entry from the Callers List 1. To delete a number from the callers list, follow the procedure described in "Checking the Caller Incoming call List, until you find the required entry. 2. Press the [Option] button and scroll to “Delete” menu. -
Page 23: Internal Intercom Calls
Internal Intercom Calls With multiple handsets registered to the Base Station internal intercom calls between handsets can be made. Press Intercom [INT] button, the screen will show Press Intercom [INT] button, the screen will show , you may dial 1,2,3,4,5 or 6 to call another , you may dial 1,2,3,4,5 or 6 to call another handset for intercom. -
Page 24: Handset Setup
Paging the Handset You can confirm the connection/operation of all handsets on the system by paging the handsets. If each handset sounds a loud warbling tone this confirms communication with the Base Station. 1. Press the Page Button on the front of the Base Station. 2. -
Page 25: Auto Answer On/Off
Network Flash (Recall) time setup To operate your Orchid LR telephone on a PBX, PABX or Comparable telephone system, you may have to change the flash time to be compatible with the system. 1 Press [Menu] button to enter the icon page. Scroll to icon. -
Page 26: Dial Pause Time Setup
Dial pause time setup To access an exchange line when the Orchid LR telephone is used on PBX, PABX or comparable telephone system, a dial pause can be inserted after the first digit (usually dialing 9). The pause can be set to between 1 and 6 seconds. -
Page 27: Answering Machine Use And Settings (Model Lr4620T Only)
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Answering machine use and settings The Orchid LR7620T/LR7620T Duo/LR8620T/LR8620T Duo has an integrated answering machine. The answering machine and functions can be operated by the handset(s) but some key functions are more simply accessed from the Base Station e.g.; Answer on/off and Message playback. -
Page 28: Recording An Outgoing Message (Ogm)
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Recording an outgoing message (OGM) 1. Press [Menu] button to enter the icon page and scroll to icon. Press [OK] to enter the TAM (answering machine) menu. 2. Scroll to “OGM” menu. Press [OK] to enter. 3. -
Page 29: Messages
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Messages “New Msgs” is displayed whenever new messages have been received. The green LED (Message/Line) also flashes on the Base Station. Operating the Answering Machine using the handset Playing a message. 1. Press the [Top] Button once. The handset will enter the Message menu page. Scroll to Play menu and press [OK] button. -
Page 30: Recording A Memo
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Recording a memo You can record a memo which is played as a normal message. Message 1. Press button once to get to the “Message” menu option. 2. Scroll to “memo” menu. Press [OK] once. 3. “Recording…” will appear on the display. You can now dictate your outgoing message up to a Back maximum length of 120 seconds. -
Page 31: Call Monitoring
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Call Monitoring The LR7520T/LR8620T enables you to monitor incoming callers leaving a message. This enables you interrupt the Answering machine and take the call personally or let the machine take the message. To interrupt the answering machine during monitoring press button this will disconnect the Answering machine and connect you with the caller. -
Page 32: Answering Machine Remote Function
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only Answering Machine Remote Function Call your phone number from a touch tone telephone; when your phones answers enter your 4 digit remote access PIN number during or after the OGM. You will hear a beep tone to confirm acceptance, to proceed, enter a remote command option within 8 seconds of the confirmation beep. -
Page 33: To Change The Announcement Only Ogm
LR7620T/LR7620T Duo/LR8620T/LR8620T Duo only To change the Announcement Only OGM (OGM2) Press Begin recording your new OGM When completed press , the new OGM will automatically playback to you You can re-record it by repeating this process Remote Turn On You can turn your answering machine on when you are away from home by following procedure:- Call the phone number;... -
Page 34: Registering Additional Handsets
Registering Additional Handsets A maximum number of 6 handsets can be Registered to a single Orchid Base Station. Only Orchid LR4600, LR8600 and LR9600 series handsets can be registered to the LR8610 and LR8620T Base Stations. If you have purchased a Twin (Duo) pack or Triple (Trio) pack all the handsets will If you have purchased a Twin (Duo) pack or Triple (Trio) pack all the handsets will have been Pre-registered to the Base Station. -
Page 35: Troubleshooting
– extension cable and other telephones. If the telephone works afterwards, this indicates that the fault is caused by another device. If these basic diagnostics do not indicate where the problem is then call our Orchid Service Centre helpline:- xxxxxxxx Telephone number is not displayed •... -
Page 36: Poor Sound Quality
If you have recently reconnected the telephone cable of the Orchid LR telephone, unplug the power adapter and the telephone cable from the telephone for 2 minutes. Reconnect the telephone line cord and the power adapter again. -
Page 37: Appendix
Conformity. Conformity with the above directive is confirmed by the CE symbol on the device. Headset socket Contact your supplier for details of the Orchid headset. For guaranteed compatibility. The Headset is connected to the handset using a 2.5mm audio plug. Press the make or receive calls using the headset. -
Page 38: Technical Data
Technical Data Standard: DECT = Digital Enhanced Cordless Telecommunication Advance digital standard for cordless telephones Number of channels: 120 duplex channels Transmissionfrequency range: 1880 MHz to 1900 MHz Duplex method: Multiplex time division Channel bandwidth: 1728 KHz Bit rate: 1152 kbps Modulation: GFSK Transmission power Range:... -
Page 39: Declaration Of Conformity
Declaration of Conformity Orchid Electronics Schweiz GmbH, Spinnereistrasse 12, CH-8135 Langnau am Albis, declares that the product - Orchid Digital Cordless Telephone, LR7610/LR7610 Duo/ LR7620T/LR7620T Duo/LR8610/LR8610 Duo/LR8620T/ LR8620T Duo for PSTN-Interface corresponds to this assertion, with the following standards, technical requests...
Need help?
Do you have a question about the LR7610 and is the answer not in the manual?
Questions and answers