Advertisement
Quick Links
Advertisement
Related Manuals for Equinox Systems Domin8r IIEQLED53
Summary of Contents for Equinox Systems Domin8r IIEQLED53
- Page 1 www.prolight.co.uk Order code: EQLED53 User manual...
-
Page 2: Safety Instructions
Equinox Domin8R 2 Safety WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this equipment should: Be competent Follow the instructions of this manual... -
Page 3: Operating Determinations
Equinox Domin8R 2 Safety IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •... - Page 4 Equinox Domin8R 2 Technical specifications You should find inside the Equinox carton the following items: 1, Equinox Domin8R 2 2, Power cable 3, Instruction manual Technical Specifications: DMX channels: 8 or 16 selectable 120 x 5mm LEDs (R: 40, G: 40, B: 40) Sound active, auto, master/slave and DMX modes IEC power in/out sockets 3-pin XLR in/out sockets...
- Page 5 Equinox Domin8R 2 Operation Operation modes: DMX mode: To select DMX mode, press the “MENU” button to show “ADDR” on the display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the DMX address from 001-512. When you have finished setting the desired DMX address press the “ENTER”...
- Page 6 Equinox Domin8R 2 DMX Charts 8 channel DMX chart: CHANNEL VALUE FUNCTION 0-127 No function 128-255 0-255 Strobe (slow to fast) 0-255 Static pattern selector 0-255 Moving pattern selector 0-127 Static pattern 128-255 Moving pattern 0-255 Moving pattern speed (slow to fast) 0-127 Manual mirror tilt 128-255...
- Page 7 Equinox Domin8R 2 DMX Charts 16 channel DMX chart:...
- Page 8 Equinox Domin8R 2 DMX Set up DMX-512: • DMX (Digital Multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions form the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a data “out”...
- Page 9 Equinox Domin8R 2 DMX Set up Notice: • Be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour.
- Page 10 Equinox Domin8R 2 Notes Notes:...
- Page 11 Equinox Domin8R 2 Notes Notes:...
- Page 12 www.prolight.co.uk...
Need help?
Do you have a question about the Domin8r IIEQLED53 and is the answer not in the manual?
Questions and answers
Can you select a specific colour with the Donin8r 2 when in DMX function?