Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Indoor unit installation
1. Fit the Installation Plate
1. Fit the installation plate horizontally on a
structurally sound part of the wall with spaces
around the installation plate.
2. If the wall is made of brick, concrete or the like
use anchor bolts.
3. Fit the installation plate on the wall with (8) type
"A" screws included.
Note:
F it the Installation Plate and drill
holes in the wall according to the
wall structure and corresponding
mounting points on the installation
plate. The installation plate is different
from the ACDC12 A model.
Dimensions are in "mm/in" unless stated
otherwise.
4. Determine the hole positions according to the
diagram detailed in fig, 5. Drill (1) hole
(65mm/2.6 in.) slanting slightly to the outdoor
side. Fig. 6
5. Always use conduit when drilling through metal
grid, metal plate or the like.
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ACDC12B and is the answer not in the manual?
Questions and answers