Copy Pedal; Press The Menu Button On The Cyclometer Screen; Tap [Option] Then [Pedaling Settings] And Then [Pedaling Copy].,And Select The Copy Method; To Change The Balance, Tap [L:r Balance] - Pioneer SGY-PM910H2 Installation Manual

6 Copy pedal

Copy pedal is enabled only in pedaling monitor mode.
If only the sensor on one side is operating, you can copy the data on the other side also to display it for both sides on the
Cyclocomputer and record it in the log. You can select copy pedal of the current bike and set the balance.
6.1

Press the menu button on the CycloMeter screen.

6.2 Tap [Option] then [Pedaling settings] and then [Pedaling Copy].,and select
the copy method.
6.3

To change the balance, tap [L:R Balance].

6.4

Tap [+], [-] and change the numerical value and tap [OK].

If you set left and right incorrectly, note that the correct power will not be
displayed.
20