Setting The Clock; Timer Function - Samsung MX-J630 User Manual

Setting the Clock

During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press
the ENTER ( ) button, "CLOCK" is displayed.
3. Press the ENTER (
flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER ( ) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
) button. " TIME" appears in the
ENTER (
display.
• The current time is now set.
• You can display the time, even when you are
using another function, by pressing the
TIMER SET button once.
• You can also use the ] , [ or the
VOLUME/JOG control on the front panel
instead of the , or . button in Steps 3 and
4.

Timer Function

The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, cancel the timer by pressing the
TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the
POWER ( )button.
2. Press the TIMER SET button until
displayed.
3. Press the ENTER (
Result: ON is displayed for a few seconds. You
can set the timer switch-on time.
4. Set the timer switch-on time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
Result: The minutes flash.
) button. The hour
TIME is
) button.
) button.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
Result: OFF is displayed for a few seconds.
You can now set the timer switch-off
time.
5. Set the timer switch-off time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
Result: The minutes flash.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
Result: VOL XX is displayed, where XX corre-
sponds to the volume already set.
6. Press the , or . button to adjust the volume
level, and then press the ENTER (
Result: The source to be selected is displayed.
7. Press the , or . button to select the desired
source to be played when the system switches
on.
You must also...
If you select...
FM/AM (radio) a Press the ENTER (
b Select a preset station by pressing
the , or . button.
CD/MP3 (compact di s c) Load one compact disc.
USB Connect the USB device.
8. Press the ENTER (
Result: CHKREC (Do you want to record?) is dis-
played.
9. Press the ENTER (
Result: REC N is displayed. You can press the
, or . button to select REC Y or REC N, and
then press ENTER (
1). If you select REC N, the MiNi Hi-Fi
Component will not record when it turns on. If
you have already set a tuner timer recording,
selecting REC N cancels it. Note that the MiNi
Hi-Fi Component will still turn on and off at
the times you set earlier in this procedure.
2). If you select the REC Y, you can set the MiNi
Hi-Fi Component to record when it turns on.
The recording switch on and switch off times
can be different from the timer switch on and
off times you set earlier in this procedure.
a. Press the ENTER (
Result: ON is displayed for a few seconds.
You can set the tuner timer recording
switch-on time.
) button.
) button.
) button.
)button.
) button.
) button.
) button.
) button.
) button.
15 14
English English