Table of Contents
Advertisement
REAR WHE EL/BRAKE/S U S P E N S I O N
SEAT / R EAR FEN DER/SUB-FRAM E
R E M OVAL/ I N STA L LAT I O N
Remove the seat mounting socket bolts a n d unhook the seat
hooks from the frame, then remove the seat.
Remove the right and left side covers, pull out the prongs then
pull the cover down slowly to the release tabs .
Remove the fuel tank (page 4-3) and the rear fender mounting
bolts and Remove the tallight case mounting nuts .
Disconnect the right and left turn signal wire connectors, and
the rear brake light and licence light connectors.
Remove the rear fender from the main frame and sub-frame.
Remove the two sub-frame mounting bolts and two nuts, then
remove the sub-frame.
I nstall the removed parts i n the reverse order of remova l .
( 9 ) REAR
1 3- 1 8
( 2 ) SEAT
( 7 ) SUB-FRA M E
MOUNTING
N UTS
· ·- - - . .
(3) RIGHT
SIDE
COVER
(6) TAILLIGHT CASE
MOUNTING N UTS
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the VT600C Shadow VLX and is the answer not in the manual?
Questions and answers
Needing to find type and size of replacement battery for 2005 honda shadow 600cc
The replacement battery for a 2005 Honda VT600C Shadow VLX is a 12V - 8Ah battery.
This answer is automatically generated
where does part 63700 go?
Part number 63700-MR1-000ZA is a cover for the Honda VT600C Shadow VLX 1988 (J) USA California. It is identified as COVER,*PB-161C-U* and fits this motorcycle model.
This answer is automatically generated