Bosch RT30A Instruction Manual page 8

High Density Video Cassette Recorder | Instruction Manual | Controls
15. SPEED + - Selects the record/playback tape speed
- Press to select from an ascending order, the
record/ playback speed (6H, 18H, 30H...).
16. TIMER - Press to select the programmed recording
timer on/off.
17. SHARPNESS- - Press to sharpen the picture when
in PLAYBACK, SLOW, STILL, CUE and REV
modes.
18. SHARPNESS + - Press to sharpen the picture
when in PLAYBACK, SLOW, STILL, CUE and
REV modes.
19. ALARM - Press to set the ALARM mode On/Off
20. AUDIO - Press to set the AUDIO mode On/Off
when in 6H, 18H, or 30H playback option.
21. PLAY/REC CHECK - Press to play back a
previously recorded tape. Pressing this button while
recording provides confirmation of the recording
operation. The tape plays back the last 4 seconds of
video then returns to the recording mode.
22. PAUSE/STILL - When pressed during recording,
tape movement stops temporarily. Press REC
button to continue the recording. When pressed
during playback, tape movement stops. Press again
to advance by still frame. Press the PLAY button to
continue playback.
Display Window Indications:
Figure 2: Display Window
1. RECORD LOCK - Illuminates when the record
lock function is operational.
2. PF - Illuminates when the VCR power had failed.
3. Cassette status - Illuminates when a cassette is
located in the recorder.
Bosch Security Systems | 26 Feb 2003 | Draft
4. TIMER - Illuminates when the timer recording
mode is on.
5. REC - Illuminates when recording mode is
operating and TIMER is set on.
6. CLOCK - Displays the current time.
7. COUNT - Displays the relative position on the
tape.
8. REMAIN - Displays the remaining time on the
tape.
9. ALARM - Illuminates when the alarm mode is on.
10. ALARM - Illuminates during alarm recording.
Flashes when alarm recording ends or
acknowledged.
11. DIGIT - Displays the tape speed during
playback/recording.
12. FUNCTION indicator - Displays the time, counter,
remain indication.
13. END - Illuminates when the tape reaches the end.
14. R-REC - Illuminates when repeat recording option
is selected.
15. S-REC - Illuminates when you use two or more
VCRs in series.
16. B/W - Illuminates when the B/W mode option is
selected.
17. VCR indicator - Displays the current VCR
operational function as listed in the table below:
VCR Indication - Playback Display
PLAYBACK
STILL
SLOW PLAYBACK
FORWARD SEARCH (CUE)
REVERSE SEARCH (REVIEW)
REVERSE PLAYBACK
EN | 7