Table of Contents
Advertisement
Issue 3
Original version
March 2012
PANTHER MAGNETIC DRILLING
MACHINE
Model No. SMARTPANTHER1,
SMARTPANTHER3
This machine (Serial No
) is CE approved.
Rotabroach Ltd
Imperial Works, Sheffield Road
Sheffield, South Yorkshire
United Kingdom
S9 2YL
Tel: +44 (0) 114 2212 510
Fax: +44 (0) 114 2212 563
Email:
sales@rotabroach.co.uk
Web site: www.rotabroach.co.uk
- 1 -
Advertisement
Table of Contents
Related Manuals for Rotabroach SMARTPANTHER1
Summary of Contents for Rotabroach SMARTPANTHER1
- Page 1 Issue 3 Original version March 2012 PANTHER MAGNETIC DRILLING MACHINE Model No. SMARTPANTHER1, SMARTPANTHER3 This machine (Serial No ) is CE approved. Rotabroach Ltd Imperial Works, Sheffield Road Sheffield, South Yorkshire United Kingdom S9 2YL Tel: +44 (0) 114 2212 510...
- Page 2 Issue 3 Original version March 2012 Other products by Rotabroach. For more information please visit our website at www.rotabroach.co.uk Or contact our sales department on +44 (0) 114 2212 510 - 2 -...
-
Page 3: Table Of Contents
It is designed for use in Fabrication, Construction, Railways, Petrochemical and any other application when drilling ferrous metal. Any deviation from its intended use will not be the subject of responsibility from Rotabroach. 2) GENERAL SAFETY RULES... -
Page 4: General Safety
Issue 3 Original version March 2012 Keep work area well lit. Do not use tools in the presence of flammable liquid or gases. Guard against electric shock Avoid body contact with earthed or ground surfaces (e.g. pipes, radiators, cookers and refrigerators). Electric safety can be further improved by using a high-sensitivity (30 m A/0.1s) residual current device (RCD). -
Page 5: Machine Specification
Issue 3 Original version March 2012 3) Specification Maximum hole cutting capacity in .2/.3C steel = 40mm dia. x 52mm deep Arbor bore = 19.05mm (3/4”) dia. Motor Unit Smartpanther1 110v 50-60Hz 1100W (Nominal values) Smartpanther3 230v 50-60Hz 1100W Electro Magnet... -
Page 6: Operating Instructions
When not in use ALLWAYS store the machine in a safe and secure location when not in use. ALLWAYS ensure that approved ROTABROACH™ agents conduct repairs. OPERATING INSTRUCTIONS Keep the inside of the cutter clear of swarf. It restricts the operating depth of the cutter. -
Page 7: Cutsmart Feature
5) Cutsmart feature ‘ CutSmart’ is a new feature from Rotabroach. Designed to help you to get the best out of your machine. It does this by way of a visual indicator. The visual indicator shows when you are using the drill correctly within its specification this is done by way of a Tri colour LED to the Right of the magnet on LED. -
Page 8: Mounting Of Cutters
Issue 3 Original version March 2012 ALWAYS DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CHANGING CUTTERS. 6) MOUNTING OF CUTTERS The machine has been made to accept cutters having 19.05mm (3/4”) dia. shanks. The following procedure is to be used when mounting cutters. ... -
Page 9: Wiring Diagram
Issue 3 Original version March 2012 7) WIRING DIAGRAM - 9 -... -
Page 10: Speed Selection
Issue 3 Original Version March 2012 8) CUTTING SPEEDS. Typical cutting speeds (RPM) for various materials Cutter Surface speed. Cutter Surface speed. 239 398 796 1194 122 245 367 220 367 734 1102 119 239 358 205 341 682 1023 116 233 349 191 318 637 955 114 227 341... -
Page 11: Exploded Diagram Of Machine
Issue 3 Original Version March 2012 9) Exploded view of complete machine. - 11 -... - Page 12 Issue 3 Original Version March 2012 Item Part No. Component Quantity Item Part No. Component Quantity RD23601 Guard Assembly 6.13 RD45604 Earth tag RD33640 Guard 6.14 RD45606 Protection switch RD4077 Panhead screw 6.15 RD33145 Depth Gauge RD33647 Guard bracket 6.16 RD33146 Label plate rivet RD45620...
-
Page 13: Exploded Diagram Of Motor
Issue 3 Original Version March 2012 10) EXPLODED VIEW-MOTOR AND GEARBOX - 13 -... - Page 14 Issue 3 Original Version March 2012 Component parts of motor and gearbox RD23661 (110v) & RD23663 (230v) Item Part No. Component Item Part No. Component RD23651 Motor assembly (110v) RD23616 Motor housing assembly RD23653 Motor assembly (230v) RD33613 Motor housing RD23631 Armature assembly (110v) RD33614...
-
Page 15: Pipe Adaptor Kit
Issue 3 Original Version March 2012 11) PIPE ADAPTOR KIT RD2311 FITTING INSTRUCTIONS Dependent upon the size of the pipe to be cut (see illustrations) attach adjustable angle plates RD3328 with cap screws RD4325 and washers RD4205 (4 off each) to the magnet sides. -
Page 16: Chuck Conversion
13) Tips for keeping your machine in correct working order. In order to ‘get the best life’ out of your Rotabroach machine always keep in good working order. A well maintained machine is a happy machine. A number of items must always be checked on Rotabroach machines. - Page 17 Issue 3 Original Version March 2012 Machine Brushes - should be checked to make sure there is no abnormal wear present this should be checked at least once a week if used frequently. If the brush has worn more than 2/3 the original length the brushes should be changed.
-
Page 18: Trouble Shooting
Issue 3 Original Version March 2012 14) TROUBLE SHOOTING Magnet and motor do not function - The magnet switch is not connected to the power supply - Damaged or defective wiring - Defective fuse - Defective magnet switch - Defective Control Unit - Defective power supply Magnet does function, the motor does not - Damaged or defective wiring... -
Page 19: Cutter Selection And Speeds And Feeds Information
Issue 3 Original Version March 2012 15) Cutter selection, Speeds and Feeds - 19 -... -
Page 20: Warranty
WARRANTY STATEMENT Rotabroach® warrants its machines to be free from faulty materials, or workmanship under normal use for a period of 12 months from initial date of purchase and 90 days for all other parts (excluding cutters), provided that the warranty registration card (or online registration) has been completed and returned to Rotabroach®, or its designated distributor...
Need help?
Do you have a question about the SMARTPANTHER1 and is the answer not in the manual?
Questions and answers