Related Manuals for GARDINER TECHNOLOGY GARDTEC 590
Summary of Contents for GARDINER TECHNOLOGY GARDTEC 590
- Page 1 GARDINER TECHNOLOGY LCD User Instructions & LED User Instructions...
-
Page 2: Table Of Contents
User Manual GARDTEC 590/591 Contents Using LCD Keypads Introduction ..............User Code Types ............Setting The System ............Unsetting The System ..........Part Setting The System ..........Removing Zones............Testing The System ............Viewing The Event Log ..........Changing The Chime Status......... -
Page 3: Introduction
User Code Types Four types of User Codes are available on the Gardtec 590/591 , each user code type allows for different levels of access. In total 7 User codes may be programmed by a Master Level User Code. -
Page 4: Setting The System
User Manual GARDTEC 590/591 Setting The System This section is for systems fitted with LCD keypads for LED keypads please refer to page 13 With the display showing:- < < < < UN-SET > > > > 01 JAN 18 : 58 : 01 Enter the User code (followed by YES if Master or Main type code has been used). -
Page 5: Part Setting The System
User Manual GARDTEC 590/591 Part Setting The System (using Master & Main type codes) < < < < UN-SET > > > > With the display showing:- 01 JAN 18 : 58 : 01 Enter a Master or Main type code, the Do you want to . -
Page 6: Removing Zones
User Manual GARDTEC 590/591 Removing Zones (Master & Main codes only) If programmed by the installation company individual zones may be removed, this may only be done by a Master or Main level of code. With the display showing:- < < < < UN-SET > > > >... -
Page 7: Testing The System
User Manual GARDTEC 590/591 Testing The System (Master & Main codes only) With the display showing:- < < < < UN-SET > > > > 01 JAN 18 : 58 : 01 Enter a Master or Main level code, Do you want to . . -
Page 8: Viewing The Event Log
User Manual GARDTEC 590/591 Viewing The Event Log (Master code only) With the display showing:- < < < < UN-SET > > > > 01 JAN 18 : 58 : 01 Enter a Master Code, the display Do you want to . . -
Page 9: Changing The Chime Status
User Manual GARDTEC 590/591 Changing The Chime Status (Master code only) The Chime zones will have previously been programmed by the installation company. A Master level code may change the status of the Chime between On and Off. To do... -
Page 10: Programming User Codes
User Manual GARDTEC 590/591 Programming User Codes (Master code only) With the display showing:- < < < < UN-SET > > > > 01 JAN 18 : 58 : 01 Enter a Master Code, the display will show:- Do you want to . . -
Page 11: Programming Time & Date
User Manual GARDTEC 590/591 Programming Time & Date With the display showing:- < < < < UN-SET > > > > 01 JAN 18 : 58 : 01 Enter a Master Code, the display will show:- Do you want to . . -
Page 12: User Initiating Remote Access
User Manual GARDTEC 590/591 User Initiating Remote Access (Optional) Access Remote allows your installation company to examine your system and re- program system settings as you need the changes without the need for an engineer to visit your premises. If your system has remote communications fitted your installation company may have programmed the system so that you initialise the Access Remote call (usually on lines with incoming calls barred). -
Page 13: Resetting After An Alarm
User Manual GARDTEC 590/591 Resetting After an Alarm Your installation company will have programmed the reset modes for your system so that it complies to your insurance company and legislation requirements. Your installation company will have informed you as to the type of reset that your system is set for. -
Page 14: Resetting After Mains Failure
User Manual GARDTEC 590/591 To reset the system with an anti-Code, contact the central station or engineer (as instructed by the installation company) and quote the source given by the display. The central station or engineer will give a return Anti-Code ( this may contain the YES &... -
Page 15: Unsetting The System
GARDTEC 800 Series GARDTEC 590/591 Unsetting The System Enter the premises via the authorised entry route (the broken entry tone will sound). Proceed to the keypad, enter a valid user code, the display will show U N The system is now Unset. -
Page 16: Area Setting
User Manual GARDTEC 590/591 Removing Zones (Master & Main codes only) If programmed by the installation company individual zones may be removed, this may only be done by a Master or Main level of code. With the display showing U N Enter a Master or Main level code. -
Page 17: Testing The System
User Manual GARDTEC 590/591 Testing The System (Master & Main codes only) With the display showing U N Enter a Master or Main level code, the display will show S E (flashing). Press NO twice, the display will show t E (flashing). -
Page 18: Viewing The Event Log
User Manual GARDTEC 590/591 Viewing The Event Log (Master code only) With the display showing U N enter a Master code. The display will show S E (flashing), press NO three times. The display will show L O (flashing). Press YES, the display may show for example A L this is the most recent event. -
Page 19: Changing The Chime Status
User Manual GARDTEC 590/591 Changing The Chime Status (Master code only) The Chime zones will have previously been programmed by your installation company. A Master level code may change the status of the chime between On and Off. To do... -
Page 20: User Initiating Remote Access
User Manual GARDTEC 590/591 If you wish to program other User codes return to step 4 To return to the Unset condition press 0 Programming Date & Time Note: When using LED keypads the Date & time will only be displayed when the 3 key is pressed whilst viewing the Log. -
Page 21: Resetting After An Alarm
User Manual GARDTEC 590/591 Resetting After An Alarm Your installation company will have programmed the reset modes for your system so that it complies to your insurance company and legislation requirements. Your installation company will have informed you as to the type of reset that your system is set for. -
Page 22: Led Display Glossary
User Manual GARDTEC 590/591 LED Display Glossary Displays During Normal Use occurred whilst programming. System Unset. Reset by Anti-Code is required. The system is full setting. (flashing) Do you want to Set. The system is fully set. Remove zones. The system is part 1 setting. - Page 23 User Manual GARDTEC 590/591 Displays Whilst Viewing Log Alarm occurred because of zone 4 was activated. Alarm occurred because of tamper on zone 4. (flashing) zone 4 was removed. Telephone Line restored. Power restored. Duress code by user 3. Watchdog reset.
-
Page 24: System Attributes
User Manual GARDTEC 590/591 System Attributes Zone No. Zone Type Location Part Info Example Front Door 1&2 Service Record Date Comments Signature Alarm Reset Type:- Tamper Reset Type:- Service Company:- Tel:- Fax:- Page... -
Page 25: User Chart
User Manual GARDTEC 590/591 User Chart Please use this chart to indicate what user names have been programmed onto your system and those that are in use. In Use Name User 1 User 2 User 3 User 4 User 5... -
Page 26: Ace Instructions
GARDTEC 590/591 ACE User Instructions ACE (Advanced Control Equipment) allows control of your Gardtec 590/591 system via Infra-Red Remote control. Ace is available built in to a range of keypads or as a stand alone unit, control is via neat remote keyfob(s). -
Page 27: Programming Ace Keyfobs Onto Your System
User Manual GARDTEC 590/591 Programming ACE Keyfobs onto your System Two modes are available for ACE, these are ‘Normal’ & ‘High’ Security. Please check the User Information Chart on page 2 noting the mode of your ACE control. Normal Security... - Page 28 GARDINER TECHNOLOGY Gardiner Technology Ltd Queensway, Rochdale, Lancashire, OL11 1TQ United Kingdom Internet: http://www.gardiner-technology.com e-mail: sales@gardiner-technology.com PR5075 Rev1.0...
Need help?
Do you have a question about the GARDTEC 590 and is the answer not in the manual?
Questions and answers