Page 2
SL-68 Hand Wired Amp Each SL68 amp features hand wired construction, four EL-34‘s (which deliver 100 watts), four inputs, two channels, a Low Power switch, Master Volume control, and delivers a wide range of classic and modern tones. From warm and sparkling cleans, to high-gain *Variac™style overdrive tones, the SL68 is the foundation of great rock tones! *Variac is a trademark of ISE, Inc.
On, normal operation end, useful when performing at louder volumes. LOW: Changes the SL-68’s feel from tight and aggressive to Middle: Adjusts the midrange. Turning it clockwise increases the amount spongy with a smoother attack, excellent for solo playing.
Page 4
Bridging or Jumping the Channels Bridging or Jumping the channels will unlock a palette of sounds and expand the SL-68’s possibilities. Begin by plugging your guitar into the top (high sensitivity) input of Channel I, then run a short instrument patch cable from Channel I’s bottom (low sensitivity) input to the top (high sensitivity) input of Channel II, then blend Volume I and Volume II controls to dial in a wealth of new and unique tones.
Page 5
Master Volume: Adjusts the SL-68‘s overall output level and offers the flexibility to dial up rich, high-gain overdrive at any volume. Tubes The SL-68 tube compliment consists of four EL-34 power tubes and three12AX7 preamp tubes. Speaker Outputs: Two loudspeaker outputs wired in parallel with 3-way impedance selector switch for 4Ω, 8Ω & 16Ω.
Page 7
We encourage international customers to purchase through your local distributor or dealer for this reason. Our international distributors are set up to handle warranty issues in their respective countries. If you do not have an authorized Suhr dealer in your country, please contact us direct for further details.
Need help?
Do you have a question about the SL-68 and is the answer not in the manual?
Questions and answers