Advertisement
1. Product overview
2. Accessories
1). USB car charger
2). USB charging cable
3). Sun‐visor clip
4). Rechargeable lithium battery
Note: All accessories are also available on avantree.com.
3. Pairing and connecting
Under pairing mode, the LED will flash blue and red alternately.
Step 1
Ensure the car kit is off.
Step 2
Press and hold MFB button for 7 seconds until LED indicator flashes blue and red alternately. Once
turned on the speakerphone, if not detected any conncetion, it will auto matically go to pairing
mode.
Step 3
Activate Bluetooth on your phone and select 'Avantree BTCK‐10B'.
Step 4
The speakerphone is ready for use now.
Note: Once paired and connected, the speakerphone will be automatically connected to the device whenever
you turn the speakerphone on again, provided the device is in range. When losing connection, the
speakerphone will automatically switch itself off after 30 minutes.
Advertisement
Table of Contents
Related Manuals for Avantree 10BP
Summary of Contents for Avantree 10BP
- Page 1 1. Product overview 2. Accessories 1). USB car charger 2). USB charging cable 3). Sun‐visor clip 4). Rechargeable lithium battery Note: All accessories are also available on avantree.com. 3. Pairing and connecting Under pairing mode, the LED will flash blue and red alternately. Step 1 Ensure the car kit is off. Step 2 Press and hold MFB button for 7 seconds until LED indicator flashes blue and red alternately. Once turned on the speakerphone, if not detected any conncetion, it will auto matically go to pairing mode. Step 3 Activate Bluetooth on your phone and select ‘Avantree BTCK‐10B’. ...
- Page 2 V+ Multipoint function on Press and hold V + for 3 seconds V‐ Multipoint function off Press and hold V ‐for 3 seconds Transfer calls during speakerphone to mobile V+ & V‐ Press V‐ and V+ together (during a call) phone Note: some functions are mobile dependent and may not work with some phones. The LED will show red during mute mode. Contact us at support@avantree.com for details. 5. How to pair with two mobile phone simultaneously (multipoint function) The default setting of 10BP’s multipoint function is on. Step 1 Pair and connect 10BP with the first phone as above. Step 2 Turn off the speakerphone. Press and hold MFB button for 7 seconds until LED flashes red and blue alternately. Pair and connect with the second phone as above. Step 3 Power off and power on 10BP again. Then it will automatically connect with the last 2 paired phones 6. Restore to default settings You may need to reset 10BP if it is not working as expected. When it is reset to factory default settings, all the paired mobile phones information will be erased. Step1: Press and hold both V+ and V‐ for about 10 seconds until the LED flashes blue and red, then release the buttons. Step2: Power off 10BP. After being powered on again, it will enter pairing mode automatically. ...
- Page 3 7. How to charge When the battery becomes low, the LED will flash red every 3 seconds, and you should recharge your 10BP. Please charge by using the supplied car charger, USB charger or PC USB port. It normally takes about 3 hours to fully charge the battery. The LED will indicate red when charging and off when charging is complete. Charging requirements: You can plug our supplied USB cable to your own USB chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA‐1A or PC USB port. It is OK to use most mobile phone chargers on the market. 8. Product specification Bluetooth compliance: Bluetooth V4.0 Operating frequency band: 2.4GHz ~ 2.48GHz unlicensed ISM band Operation range: Class 2, up to 10 metres Support profiles: HSP and HFP Profiles, A2DP Profile (GPS instruction announcement and music) Stand‐by time: Up to 980 hours/40 days Talk time: Up to 10‐12 hours Battery charging Time: About 3 hours Charger voltage: DC5.0V, 500mA Battery: 650mA, BL‐5B (Rechargeable lithium‐ion battery) The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles and environments. For more information and FAQ, please refer to support.avantree.com or contact us at support@avantree.com. FCC ID: WJ5‐BTCK‐10BP Z‐PKMN‐CK10BP‐0000 ...
Need help?
Do you have a question about the 10BP and is the answer not in the manual?
Questions and answers