Setting Up Codes - JSB RS64 User Manual

Master Code
To enter or change 4-digit Master Code.
Select Opcode 40
If zone lights 1-4 flash, code exists
Press OMIT to delete the code
If zone lights 1-4 constant, enter new code
Press 4 numbered keys for new code; the lights will extinguish one at a time
Press ENTER to submit the new code
If Warble sounds, code is accepted
If Buzzer sounds, code is rejected. Try again using a different 4-Digit Code.
User Codes
To enter or change 4-digit User Codes.
Select Opcode
If zone lights 1-4 flash, code exists
Press OMIT to delete the code
If zone lights 1-4 constant, enter new code
Press 4 numbered keys for new code; the lights will extinguish one at a time
Press ENTER to submit the new code
If Warble sounds, code is accepted
If Buzzer sounds, code is rejected. Try again using a different 4-Digit Code.
41 for User Code 1
42 for User Code 2
43 for User Code 3
44 for User Code 4
45 for User Code 5
46 for User Code 6
47 for User Code 7
48 for User Code 8
49 for Cleaner Code
8