Advertisement

Manual

Quick Start Guide

This quick start guide describes how to install and use the Dual Rate SFP media
converter. The converter introduced here provides one channel media conversion
solution.
Physical Description
Product Overview
This Dual Rate SFP media converter is a plug-and-play device. Connect the supplied
AC to DC power adaptor to the receptacle on the rear panel of the Dual Rate SFP media
converter, and then attach the plug into a standard AC outlet.
DIP Switch
No.
Down
1
Disable LFPT
2
Enable Auto-Negotiation for TX port
3
TX port Force mode: Full-duplex
4
TX port Force mode: 100Mbps
5
SFP at 100Mbps
6
Function reserved
<Note> Power must be off/on after re-setting LFPT function.
Important: Note that XSNet Series manuals may cover multiple
models. To establish if a particular feature or specification in this
manual applies to the unit at hand, consult the datasheet of the
given model.
Up
Enable LFPT
Enable Force mode for TX
port
TX port Force mode:
Half-duplex
TX port Force mode:
10Mbps
SFP at 1000Mbps
Function reserved
1
XSNet 3300MC
LFPT:
Link-Fault-Pass-Through
function

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XSNet 3300MC and is the answer not in the manual?

Questions and answers

Summary of Contents for Siqura XSNet 3300MC

  • Page 1: Quick Start Guide

    XSNet 3300MC Important: Note that XSNet Series manuals may cover multiple models. To establish if a particular feature or specification in this Manual manual applies to the unit at hand, consult the datasheet of the given model. Quick Start Guide This quick start guide describes how to install and use the Dual Rate SFP media converter.
  • Page 2 XSNet 3300MC The 10/100/1000Base-TX and SFP Connectors The 10/100/1000Base-TX Connection The following lists the pinouts of 10/100/1000Base-TX port. The SFP Connection The SFP socket for 100Base and 1000Base fiber optic expansion. For SFP expansion The Port Status LEDs LEDs State...
  • Page 3: Functional Description

    XSNet 3300MC Functional Description  Complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, and IEEE802.3z 1000Base-SX/LX.  Supports IEEE802.3x Flow control: Flow control for Full-duplex and Back pressure for Half-duplex.  SFP fiber interface supports 100Base and 1000Base dual rate fiber transmission.
  • Page 4: Fcc Statement

    XSNet 3300MC FCC Statement The FCC (Federal Communications Commission) restricts the amount of radio frequency emission and radiation coming from computer equipment. The equipment introduced in this manual has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules.
  • Page 5: Table Of Contents

    XSNet 3300MC Table of Contents ............. 1 UICK TART UIDE ..........1 HYSICAL ESCRIPTION ...........3 UNCTIONAL ESCRIPTION ..............4 FCC S TATEMENT ................. 4 RADEMARKS .................. 4 REFACE ............. 5 ABLE OF ONTENTS ............... 6 NTRODUCTION ...........6 RODUCT VERVIEW ...........7 RODUCT EATURES ..............8...
  • Page 6: Introduction

    XSNet 3300MC Introduction The Dual Rate SFP Media Converter provides one channel for media conversion between 10/100/1000Base-TX 100Base 1000Base dual rate fiber interface with link-fault-pass-through function. Product Overview Figure 1: Dual Rate SFP Media Converter with link-fault-pass-through function...
  • Page 7: Product Features

    XSNet 3300MC Product Features  Complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, and IEEE802.3z 1000Base-SX/LX.  Supports IEEE802.3x Flow control: Flow control for Full-duplex and Back pressure for Half-duplex.  SFP fiber interface supports 100Base and 1000Base dual rate fiber transmission.
  • Page 8: Packing List

    XSNet 3300MC Packing List When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller.  The Media Converter  User’s Manual...
  • Page 9: One-Channel Media Converter

    XSNet 3300MC One-Channel Media Converter Physical Ports Rate SFP Media Converter This converter provides one TX port and one 100Base and 1000Base dual rate SFP socket. For the 100Base and 1000Base dual rate SFP socket, it provides options of multi-mode/single-mode or WDM multi-mode/single-mode fiber.
  • Page 10: Installation

    XSNet 3300MC Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: ...
  • Page 11: Specifications

    XSNet 3300MC Specifications Applicable Standards IEEE802.3 10Base-T IEEE802.3u 100Base-TX/FX IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-SX/LX Fixed Ports 1 10/100/1000Base-TX port 1 100Base and 1000Base dual rate SFP fiber interface Speed 10Base-T 10/20Mbps for half/full-duplex 100Base-TX/FX 100/200Mbps for half/full-duplex 1000Base-T 2000Mbps for full-duplex...

Table of Contents