Replacing The Pre-Filter And Collection Cells Into The Air Cleaner - American Standard AccuClean Information Manual

1. Using a vacuum hose, vacuum in even strokes
across the entire COLLECTION CELL surface.
Vacuum using even strokes in one direction, then
repeat the process using even strokes in the oppo-
site direction, as demonstrated in Figure 8 below.
2. Once vacuuming is completed on one side of the
COLLECTION CELL, turn the COLLECTION CELL
over and repeat on the other side of the COLLEC-
TION CELL.
NOTE: It is normal for COLLECTION CELLS to
discolor during operation. Vacuuming will not
restore the COLLECTION CELLS to their original
color. However, vacuuming does restore the
COLLECTION CELLS to a high efficiency.
REPLACING THE PRE-FILTER AND COLLECTION
CELLS INTO THE AIR CLEANER
1. Replace the PRE-FILTER into the air cleaner.
Ensure that the "AIRFLOW indicator arrow" on the
PREFILTER is pointing in the same direction as the
"AIRFLOW indicator arrow" on the air cleaner cabi-
net.
2. Reinstall the COLLECTION CELLS into the air
cleaner. Ensure the handles on both of the COL-
LECTION CELLS are folded flat.
12-5045-10
Fig. 8
Fig. 9
Numbers in [brackets] are for 50 Hz international systems.
User's Information
3. Replace the power door onto the air cleaner.
To install the door, follow the instructions in Figures
11 - 14 below.
Hold door so that tabs are aligned with slots in cabinet.
Insert tabs into cabinet slots. Edge of door should fit into
channel against gasket. (See detail)
Handles Fold
Flat
Fig. 10
Fig. 11
Gasket
Fig. 12
7