Related Manuals for Blackstar D:CORE STEREO 10
Summary of Contents for Blackstar D:CORE STEREO 10
- Page 1 ID:CORE STEREO 10, ID:CORE STEREO 20, ID:CORE STEREO 40 Owner’s Manual Designed and Engineered by Blackstar Amplification UK...
- Page 2 Patches can be shared, uploaded and downloaded via the online community. The USB connector also allows you to record from your amp directly to your computer. If you like what you hear and want to find out more about the Blackstar range of products please visit our website at www.blackstaramps.com.
-
Page 3: Factory Reset
Factory Reset Front Panel The default factory patches and settings can be restored to your amplifier at any 1. Input time. Simply hold down the MOD, DLY and REV switches simultaneously, whilst Plug your guitar in here. switching on the amplifier. Always use a good quality screened guitar lead. -
Page 4: Effects Table
Plug a USB cable in here to connect the amplifier to a Windows PC or Mac. This setting is saved when you store a patch. Blackstar’s INSIDER software offers a host of features and can be downloaded from: www.blackstarinsider.co.uk See the USB Audio section on page 15 for more information. -
Page 5: Patch Mode
Default Mode Toggles between 2 patches, Toggles all saved patch effects While in Manual Mode any of the controls can still be modified by the Blackstar selectable via INSIDER on/off INSIDER software but this means that the sound will not represent the positions of... -
Page 6: Rear Panel
The amplifier will appear as an audio capture device within recording software. of the value and can increase or decrease the value. The output of the audio over USB can be changed via the Blackstar INSIDER The recall indicator will flash each time the physical knob ‘passes through’ the software, and can be one of the following: currently active value that you are hearing. - Page 7 ID:CORE STEREO 10 Power: 2 x 5 Watts (Stereo 10 Watts) Weight (kg): 3.7 Dimensions (mm): 340(W) x 265(H) x 185(D) ID:CORE STEREO 20 Power: 2 x 10 Watts (Stereo 20 Watts) Weight (kg): 5.2 Dimensions (mm): 375(W) x 292(H) x 185(D) Footcontroller (not supplied): FS-11 footcontroller ID:CORE STEREO 40 Power: 2 x 20 (Stereo 40 Watts)
- Page 8 ID:CORE STEREO 10 Front Panel...
- Page 9 ID:CORE STEREO 20 Front Panel...
- Page 10 ID:CORE STEREO 40 Front Panel...
Need help?
Do you have a question about the D:CORE STEREO 10 and is the answer not in the manual?
Questions and answers