Removing The Doona Isofix Base From Your Vehicle - doona ISOFIX Base User Manual

18
5.2. Removing the Doona ISOFIX
Base from your vehicle
Step 1: Make sure the Doona Infant Car Seat is not connected
to the ISOFIX Base. In case it is connected, please remove it first.
Detailed description for removing the Doona Infant Car Seat
from the ISOFIX Base can be found in chapter 6.2.
Step 2: Pull the ISOFIX release button (#6) on each side of the
Doona ISOFIX Base, and pull the ISOFIX Base body away from
the vehicle's ISOFIX low anchors, until the Doona ISOFIX Base is
completely disconnected.
Step 3: Fold the support leg (#10).
Note: Do not leave the Doona ISOFIX Base unattached inside
the vehicle. Any luggage or other objects liable to cause
injuries in the event of a collision shall be properly secured.
1.
THE N EX T G EN ER AT I O N C A R SEA T / IS O FI X B A S E