Samsung SMT-W5100E Quick Setup Manual page 8

If radio 1 (802.11a) is not used, it should be turned off to prevent back door to the
4.
AP.
i. [Manage], [Radio], Status: (check) Off
SMT-R2000 Repeater Mode (Wireless Distribution System):
WDS function is used to extend the coverage wirelessly. One repeater jump is allowed for each
AP.
The host AP MAC address and RF channel info are required to set up the repeater
1.
mode. Under the repeater AP,
a. [Manage], [WDS], Radio:1
i. Remote Address: (enter host AP MAC address)
b. [Manage], [Wireless Settings], Radio Interface 1
i. Channel: (set to the same channel as the host AP)
System:
1. Handset can be cleared (de-registered) from system by using MMC 849.
After selecting the extension number, move the right softkey to the field "FORCED"
a.
[WIP REGISTER CLEAR]
[3301 : FORCED
Press right softkey again
b.
[WIP REGISTER CLEAR]
[ARE YOU SURE?NO ]
Press <1> to start the process
c.
2. Useful MMCs
• MMC 847: Display status of WLI and WAP
• MMC 815: Customer database copy
• MMC 724: Dial numbering plan
Wireless IP handset is under "IP STN NUM PLAN"
o
For OfficeServ 500M version, VoWLAN starts with IDX061
o
For OfficeServ 500L version, VoWLAN starts with IDX121
o
For OfficeServ 7200, VoWLAN starts with IDX061
o
For OfficeServ 100, VoWLAN starts with IDX033
o
• MMC 805: Adjust voice path gain
© SAMSUNG Telecommunications America
]
8
01/2007