Clock Settings - Kenwood DDX7015BT Instruction Manual

INITIAL SETTINGS INITIAL SETTINGS
Activating the security function
You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.

Clock settings

1
Display the <TOP MENU> screen.
On the source control screen:
2
Display the <Setup> screen.
3
Display the <Clock> screen.
4
Set the clock time.
<NAV>* Synchronizes the clock time with
1
the connected navigation unit.
<Radio Data Synchronizes the clock time with
System>*
2 FM Radio Data System .
<DAB>* Synchronizes the clock time with
3
the digital radio (DAB).
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
5
Finish the procedure.
* Appears only when the navigation unit is connected.
1
* Only for DDX7015BT/DDX7015BTM/DDX5015BT/DDX515BT/
2
DDX515BTM/DDX715WBT/DDX715WBTM.
* Only for DDX5015DAB.
3
ENGLISH 5