Setting Time And Date Of The Icam50X; Setting Time And Date In Windows Xp - extronics iCAM501U Operating Manual

Operating Manual
2.9.2.1 Operation without windows 7 Autoplay
Simply browse to Computer\iCAM50x, and click on Internal NAND Flash as shown. Pictures
and audio are presented as a list of files

2.10 Setting Time and Date of the iCAM50x

The iCAM50x has an internal clock which is used to time code the JPEG file with information
on when a picture and audio file was taken. The internal clock will need to be set when the
camera is first used or when the batteries have been removed for an extended period of
time. If the time and date is not set the JPEG files will have an incorrect time code embedded
into the file, and the filename will be in the DSCxxx format.

2.10.1 Setting Time and Date in Windows XP

Attach the iCAM50x to the machine running Windows XP once the green status LED has
turned solid. Navigate to 'My Computer where an icon for the iCAM50x will be displayed as
shown below. Right click on the iCAM50x icon and click properties.
When the camera is first plugged in click 'Properties' and the following display is likely to be
shown.
19