Download Print this page
NuTone QTRN080L Instructions

NuTone QTRN080L Instructions

Fan / light / night lights
Hide thumbs Also See for QTRN080L:

Advertisement

Quick Links

QTRN SERIES
FAN / LIGHT / NIGHT LIGHTS
READ AND SAVE THESE INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
JURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer at the address
or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the ser-
vice disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the service
panel.
3. Installation work and electrical wiring must be done by a
standards.
ment to prevent backdrafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those
and the American Society for Heating, Refrigeration and Air
ties.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
7. Acceptable for use over a tub or shower when connected to
circuit.
8. This unit must be grounded.
!
CAUTION
2. This product is designed for installation in ceilings up to a
7/12 pitch. Duct connector must point up. DO NOT MOUNT
THIS PRODUCT IN A WALL.
3. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc. off power
unit.
tion and requirements.
MODELS QTRN080L • QTRN110L
CLEANING & MAINTENANCE
ance - lower or remove grille and vacuum interior of unit with the
dusting brush attachment.
The motor is permanently lubricated and never needs oiling. If the
be replaced.
OPERATION
The fan, light, and night light can be operated separately. Use a
3-function wall control. See "Connect Wiring" for details.
WARRANTY
-
NUTONE THREE YEAR LIMITED WARRANTY
NuTone warrants to the original consumer purchaser of its products that
such products will be free from defects in materials or workmanship for
a period of three years from the date of original purchase. THERE ARE
-
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
During this three-year period, NuTone will, at its option, repair or replace,
without charge, any product or part which is found to be defective under
normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP
installation instructions.
The duration of an implied warranty is limited to the three-year period as
on how long an implied warranty lasts, so the above limitation may not
apply to you.
NUTONE'S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE'S OP-
TION, SHALL BE THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY
-
UNDER THIS WARRANTY. NUTONE SHALL NOT BE LIABLE FOR INCI-
DENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF
OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some
damages, so the above limitation may not apply to you.
rights, which vary from state to state. This warranty supersedes all prior
warranties.
-
part. At the time of requesting warranty service, you must present evidence
of the original purchase date.
Page 1
-
-

Advertisement

loading
Need help?

Need help?

Do you have a question about the QTRN080L and is the answer not in the manual?

Questions and answers

Summary of Contents for NuTone QTRN080L

  • Page 1 FITNESS FOR A PARTICULAR PURPOSE. 5. When cutting or drilling into wall or ceiling, do not damage During this three-year period, NuTone will, at its option, repair or replace, electrical wiring and other hidden utilities. without charge, any product or part which is found to be defective under 6.
  • Page 2 MODELS QTRN080L • QTRN110L Page 2 TYPICAL INSTALLATIONS PLAN THE INSTALLATION COOKING AREA Do not install above or inside this area. NOT FOR USE IN Cooking A COOKING AREA. Equipment Floor Housing mounted to I-joists. Use I-joist spacer block (provided).
  • Page 3 MODELS QTRN080L • QTRN110L Page 3 INSTALL HOUSING & DUCT CONNECT WIRING 1. Bend housing tabs. Use a pliers to bend housing TABS out to 90 TABS 2. Mount SPACER housing to joist. Hold housing in place so that the housing...
  • Page 4: Service Parts

    MODELS QTRN080L • QTRN110L Page 4 8. Push grille against ceil- ing. 9. Remove light lens. Carefully insert a screwdriver be- tween grille and lens. Pry lens SERVICE NOTE out. To remove Blower Assem- 10. Install light bulbs. Find the single TAB on the...

This manual is also suitable for:

Qtrn110l