Advertisement
Quick Links
Advertisement
Related Manuals for Yealink T18
Summary of Contents for Yealink T18
- Page 1 Yealink IP Phone Configuration Guides Yeastar Technology Co., Ltd.
-
Page 2: Table Of Contents
Yealink IP Phone Configuration Guides Table of Contents CONFIGURING WITH MYPBX ..........错误!未定义书签。 PBX ................. 3 EGISTER WITH CONFIGURING BLF ON YEALINK ............... 6 PROVISIONING FOR MYPBX ..............8 3.1 P ............9 HONE PROVISIONING VIA MODE 3.2 P DHCP ............ -
Page 3: Register With M Ypbx
T28, T28P, T32G, T38G, VP530, VP-2009 for MyPBX Important: This guide has been tested for Yealink T12, T18, T18P, T20, T20P, T22, T22P, T26, T26P, T28, T28P, T32G, T38G, VP530, VP-2009 with firmware version X.70.0.60, Be aware that different firmware revisions may have different web interface formats and functionality. - Page 4 Yealink IP Phone Configuration Guides Figure 1-2 1) Set the "Account Active" field to "On" 2) Set the "Label" field to the name you want to appear on the Phone display 3) Set the "Display Name" field to the name you want to appear on another phone's display when calling other phones 4) Set the "Register Name"...
- Page 5 Yealink IP Phone Configuration Guides Next, we need to configure the audio codecs. Scroll down to the end of the "Basic" section, and expand the "Codecs" section. Ensure that the "Enable codecs" list box contains first "PCMU", then "PCMA", and finally "G729"...
-
Page 6: Configuring Blf On Yealink
Configuring BLF on the Yealink T26 and T28 Memory Keys (Optional) Note: 1. The Yealink T22 and the Yealink T20 do not have Memory Keys and therefore do not have BLF functionality. 2. Only PSTN and GSM trunk are allowed to be monitored currently in MyPBX 3. - Page 7 Yealink IP Phone Configuration Guides extension number to be monitored (in this example "*04500") If you set to monitor the trunk, just keep this field blank. Click the "Confirm" button at the bottom of the page. Your phone will now re-register with MyPBX with the monitoring settings enabled.
-
Page 8: Provisioning For Mypbx
This guide has been tested for Yealink T18, T18P, T20, T20P, T22, T22P, T26, T26P, T28, T28P, T32G, T38G with firmware version X.70.0.60. The easiest way to set up a Yealink phone for use with MyPBX is to use the built-in plug and play provisioning functionality inside MyPBX. This will allow the phone to configure itself by retrieving a generated phone configuration file. -
Page 9: Phone Provisioning Via Pnp Mode
Step1. Check if PNP is enabled in IP phone side Here is an example of Yealink T28 Click upgrade—advanced to check the details Figure 3-1 Step2. Check MAC address of your yealink IP Phone on status page. Figure 3-2 Step3. Reboot IP phone. www.yeastar.com... - Page 10 Input Name, Call waiting, Line, Extension, Label, Line active and so on for the phone. Note: If the version of Yealink IP phone is higher than X.70.0.XX, please choose ‗Yes‘ for ‗New config‘ field. If you use the old version, there‘s need to enable this option.
- Page 11 Click OK to reboot the IP phone and provisioning the phone. Figure 3-6 Then IP phone will reboot twice to apply the configurations take effect, when done, you can find the account 500 is registered in MyPBX‘s line status page and Yealink IP phone‘s status page. www.yeastar.com...
-
Page 12: Phone Provisioning Via Dhcp Mode
Yealink IP Phone Configuration Guides 3.2 Phone provisioning via DHCP mode Step1. Disable DHCP Server on your local network. E.g. Disable DHCP Server on Linksys Router. Figure 3-7 www.yeastar.com Page 12... - Page 13 Yealink IP Phone Configuration Guides Step2. Enable DHCP Server on MyPBX. Login MyPBX web interface, System Settings DHCP Server Enable DHCP Server. Figure 3-8 Step3. Configure phones on MyPBX Auto-Provision page. 1. Login MyPBX web interface, Basic Auto Provision Create New Phone.
- Page 14 Input IP Phone‘s MAC address, configure Name, Call waiting, Line, Extension, Label, Line active and so on for the phone. Note: If the version of Yealink IP phone is higher than X.70.0.XX, please choose ‗Yes‘ for ‗New config‘ field. If you use the old version, there‘s need to enable this option.
- Page 15 2. Enable DHCP. Figure 3-12 Then IP phone will reboot twice to apply the configurations take effect, when done, you can find the account 500 is registered in MyPBX‘s line status page and Yealink IP phone‘s status page. Step5. Done <Finish>...
Need help?
Do you have a question about the T18 and is the answer not in the manual?
Questions and answers