Charging your Lead-acid Battery
1.
Disconnect and remove the battery from the trolley
2.
Plug the charger into your mains supply
3.
Attach the battery cable to the charger matching the red and black connections
4.
Follow the charger LED indicator stages shown below:
Powered
5.
Once charging is complete please disconnect the charger from the mains power supply
6.
Finally disconnect the charger from the battery
NB : Never charge the battery outside or in conditions that may allow moisture to penetrate the charger or connections. If
the battery is not used for prolonged periods of time, please charge your battery at regular intervals (every 6 weeks). Please
do not leave it on charge or connected to the charger.
The battery should be charged for at least 12 hours before using it for the first time, please be aware that the charger can take
up to a further 8 hours to show fully charged once the battery has reached 90% charge.
Charging
Charging your Lead-acid Battery
90% Charged
Fully Charged
Page 5
Need help?
Do you have a question about the S1 and is the answer not in the manual?
Questions and answers
How to replace S1 pro wishbone on 2016 motocaddy
Can the S1 trolley height be reduced pleas. I am only 5ft and it even says 8 year olds can use it!!!!