Related Manuals for Niko KM 70
Summary of Contents for Niko KM 70
- Page 1 Operation Manual Combination Mulcher Model KM 70 / 85 / 100 Compatible with HP 510; HY 20-22/11; HY 30-38/16; HY38/16A; HY 38-40/2008 NIKO GmbH Maschinen- & Fahrzeugbau . Im Mühlgut 1a . D-77815 Bühl-Weitenung...
- Page 2 Introduction Dear Customer, Thank you for the trust in us you have demonstrated by purchasing a NIKO product. We would like to assure that we have done everything possible to provide you with an efficient and reliable product. Please read this operation manual carefully before operating the machine and note the instructions and warnings.
-
Page 3: Table Of Contents
Table of Contents Product Description • 1.) Designated Use 2.) Setup 3.) Function Description 4.) Technical Information 5.) EU Declaration of Conformity General Safety Instructions • 1.) Operator’s Obligation to Exercise Diligence 2.) Explanation of the Symbols Used 3.) Basic Safety Measures 4.) Requirements of the Operating Personnel 5.) Special Types of Danger Transportation... -
Page 4: Product Description
ADDITIONAL INFORMATION Product Description The NIKO Combination Mulcher KM is used in winemaking and forestry to mulch grass and wood cuttings and in municipal areas for hedge cutting and trimming undergrowth. The device is very robust and can be used for various purposes. -
Page 5: Function Description
ADDITIONAL INFORMATION 3. Function Description Attachment to the basic device takes place via the 3-point intake with two quick locks and a bolt on the hydraulic cylinder for lifting the device. The throttle is attached to the space provided on the handlebars of the bulldozer. -
Page 6: Technical Information
Oil Motor Parker F11 Oil Motor Parker F11 EU Declaration of Conformity As per Appendix II A of the EC Machinery Directive (89/392/EWC) NIKO Maschinen- & Fahrzeugbau The Manufacturer: Im Mühlgut 1 D-77815 Bühl-Weitenung Germany Hereby declares that the machine described in... -
Page 7: General Safety Instructions
ADDITIONAL INFORMATION General Safety Instructions 1. Operator’s Obligation to Exercise Diligence The Combination Mulcher was designed and constructed under consideration of a risk analysis and after careful selection of the harmonized norms to be maintained, as well as additional technical specifications. It is state of the art and guarantees a high measure of safety. -
Page 8: Basic Safety Measures
ADDITIONAL INFORMATION 3. Basic Safety Measures Safety Measures for the NIKO Combination Mulcher Protective equipment provided by the manufacturer may not be removed. Repairs and the replacement of parts may only be conducted when the motor is turned off. Only allow repairs to be conducted by your retailer. -
Page 9: Troubleshooting
ADDITIONAL INFORMATION Troubleshooting In order to avoid damage to the machine or life threatening injuries while remedying malfunctions in the machine, the following items must absolutely be adhered to: Only repair a malfunction if you have the required qualifications to do so. First secure the machine against unintentionally being turned back on by removing the spark plug terminal. -
Page 10: Cleaning And Lubrication
ADDITIONAL INFORMATION Maintenance In order to avoid damage to the machine or life threatening injuries while servicing the machine, the following items must absolutely be adhered to: First ensure a spacious area for the maintenance work. Use only original replacement parts which are listed on our replacement parts lists. 1. - Page 11 Ersatzteilliste 39 38 37 28 29 25 26 17145 Flail Blade (Item) Type 70 Type 85 Type 100 Combination Mulcher KM 70 / 85 / 100 Rubber Cover Tension Element 17101 17132 17102 Bearing with Adjustment Ring UCF 208 17133...
- Page 12 ADDITIONAL INFORMATION 17131 Snap Ring Drm. 10...
-
Page 13: Warranty Conditions
The warranty is void in the event of the independent conducting of repairs or alterations to the original conditions. The replacement part claim is void if NIKO original replacement parts are not used. - Page 14 ADDITIONAL INFORMATION...
Need help?
Do you have a question about the KM 70 and is the answer not in the manual?
Questions and answers