Avigilon 29mp-hd-pro-c; 29mp-hd-pro-m; 16mp-hd-pro-c; 16mp-hd-pro-m; 11mp-hd-pro-c; 11mp-hd-pro-m; 8mp-hd-pro-c; 8mp-hd-pro-m high definition professional ip
camera (23 pages)
Do not expose to rain or moisture. • For indoor use only. If used outdoors, an approved outdoor mounting adapter or enclosure is required. Consult with Avigilon for more information. • Installation must be performed by qualified personnel only, and must conform to all local codes.
Page 4
• Any external power supply connected to this product may only be connected to another Avigilon product of the same model series. External power connections must be properly insulated. • Do not connect directly to mains power for any reason.
Page 5
Changes or modifications made to this equipment not expressly approved by Avigilon Corporation or parties authorized by Avigilon Corporation could void the user’s authority to operate this equipment. Disposal and Recycling Information...
Page 6
European Union: This symbol means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human...
Avigilon reserves all rights to all software not covered under the eCos license. This includes all portions of software that were not distributed to Avigilon as part of the eCos operating system.
Overview Cover View Tamper Proof Dome Cover Screws Feature Description Dome Cover Vandal proof dome cover constructed out of aluminum with a polycarbonate bubble. Tamper Proof Screws TORX tamper-resistant captive screws to fix the dome cover to the base.
Bottom View Dome Mounting Slot Cable Entry Hole Dome Dome Mounting Slot Mounting Slot Serial Number Tag Feature Description Cable Entry Hole An entry hole for network, power and I/O cables. Dome Mounting Slot Mounting points for the dome camera. Serial Number Tag Product serial number and part number label.
Front View Ethernet Port Power Connector Block Audio Connector I/O Terminals Feature Description Ethernet Port Accepts an Ethernet connection to a network. Server communication and image data transmission occurs over this connection. Also receives power when it is connected to a network that provides Power over Ethernet.
Status LED See the section about connecting to the network video recorder for more information. The Connection Status LED can be turned off for operating in covert installations. See the Avigilon Control Center Client User Guide for more information. Image Rotation Rotates the image by a 180˚...
Heater View Heater Feature Description Heater Provides heat for the camera to extend the operating temperature range. The heater is not included with all models.
Small slotted screwdriver with 5/64” or 2 mm blade width — for connecting power when not using Power over Ethernet. Package Contents Ensure the package contains the following: • Avigilon Panoramic High Definition IP Dome Camera • Terminal block • T20 TORX tamper resistant key •...
Mounting the Dome Camera The dome camera can be mounted to a surface on its own or using one of the four dome camera mounting accessories: indoor electrical box mounting plate, indoor in-ceiling mount, indoor/outdoor mounting base, and indoor/outdoor pendant mount. To mount the dome camera, complete the following steps: Using the drill template, drill three mounting holes and one cable entry hole in the ceiling/ wall.
Connecting Power NOTE: Do not perform this procedure if Power over Ethernet (POE) is used. If PoE is not available, the dome camera needs to be powered through the removable power connector block. Refer to the diagrams in this guide for the location of the power connector block. The device can be powered from 12 VDC or 24 VAC.
Avigilon. Connect the dome camera to the same network as the server running the Avigilon Control Center software. An IP address is automatically assigned to the device, and will be detected by the software. For more information on how to configure the connection, see the software user...
Zeroconf (APIPA). If the IP address is set using Zeroconf, the IP address will be in the 169.254.* subnet. A static IP address can be set from the Avigilon Control Center software, consult the software user guide for details.
Advanced Features Upgrading the Firmware The firmware can be field-upgraded through the Avigilon Control Center software. Consult the software user guide for details on how firmware upgrades are performed. It is possible for the firmware to become corrupted during an upgrade —...
Connecting to External Devices External devices are connected through the I/O terminal. The pinout for the I/O terminal is shown in the following table and diagram. Consult the software user guide for details on how to configure the external devices. Table:External I/O Terminals Function Description...
Connecting to Microphones and Speakers The dome camera can be connected to an external microphone and speaker through the audio connector. The audio connector is a 3.5 mm (1/8”) input for a mono microphone or a line-in mono signal. The left channel of the stereo signal is used.
Cleaning Body Use a dry or lightly dampened cloth to clean the camera body. Caution — Do not use strong or abrasive detergents when cleaning the camera body.
Avigilon’s entire liability and your exclusive remedy against Avigilon for any failure of this product to operate properly. In no event shall Avigilon be liable for any indirect, incidental, special, consequential, exemplary, or punitive damages whatsoever (including but not limited to, damages for loss of profits or confidential or other...
Need help?
Do you have a question about the 8.0MP-HD-DOME-360 and is the answer not in the manual?
Questions and answers