Table of Contents
Advertisement
ATXP-965Q Technical Reference
Table B-5 ACPI Runtime Checkpoints
ACPI checkpoints are displayed when an ACPI capable operating system either enters or leaves a
sleep state. The following table describes the type of checkpoints that may occur during ACPI sleep
or wake events:
Checkpoint Code
AC
AA
01, 02, 03, 04, 05
10, 20, 30, 40, 50
Critical Error BEEP Codes
The following table describes the beep codes used by AMIBIOS:
Table B-6 AMIBIOS Beep Codes
Boot Block Beep Codes
Number of Beeps
1
2
3
4
5
6
7
10
11
12
13
POST BIOS Beep Codes
Number of Beeps
1
3
6
7
8
Chassis Plans
Appendix D – Flash BIOS Programming & POST Codes
Description
First ASL checks point. Indicates the system is running in ACPI mode.
System is running in APIC mode.
Entering sleep state S1, S2, S3, S4, or S5.
Waking from sleep state S1, S2, S3, S4, or S5.
Description
No media present. (Insert diskette in floppy drive A:)
'AMIBOOT.ROM' file not found in root directory of diskette in A:
Insert next diskette if multiple diskettes are used for recovery
Flash Programming successful
File read error
Keyboard controller BAT command failed
No Flash EPROM detected
Flash Erase error
Flash Program error
'AMIBOOT.ROM' file size error
BIOS ROM image mismatch (file layout does not match image
present in flash device)
Description
Memory refreshes timer error.
Base memory read/write test error
8042 Gate A20 test error (cannot switch to protected mode)
General exception error (processor exception interrupt error)
Display memory error (system video adapter)
71
Advertisement
Table of Contents
Need help?
Do you have a question about the ATXP-965Q and is the answer not in the manual?
Questions and answers