Chapter 5 - Using Peripherals / Accessories
Attach an Extended Battery
Note:
Honeywell recommends that installation or removal of accessories be performed on a clean, well-lit surface. Protect
the work surface, the Marathon, and components from electrostatic discharge. Contact
assistance when attaching or removing an extended battery.
1. Turn the Marathon Off. Remove any cables, straps or accessories attached to the Marathon.
2. Place the Marathon face down on a stable surface.
3. Remove the 2 mounting screws securing the extended battery connector cover to the Marathon and remove the cover.
Put the screws and cover aside in a safe place.
4. Line up the charging pins on the extended battery with the charging pins in the Marathon extended battery connector
bay.
5. Connect the extended battery to the Marathon using the captive screws in the extended battery.
Technical Support
for
5-1