Door Seal; Ventilation Slits - Miele KFNS 37692 iDE Operating And Installation Instructions

Cleaning and care
^ Remove any soiling on stainless steel
strips and plinths with the Miele care
product for stainless steel.
^ Always wipe these surfaces with a
stainless steel conditioner immediate-
ly after each cleaning.
This protects the stainless steel
surfaces and prevents resoiling.
^ Leave the appliance doors open for a
short time.

Door seal

Do not use any grease or oil on the
door seal as these will cause the
seal to deteriorate and become
porous over time.
^ The door seal should be cleaned
regularly with clean water and then
wiped thoroughly dry with a soft
cloth.

Ventilation slits

^ The ventilation slits should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build-up
of dust will increase the energy
consumption of the appliance.
60
After cleaning
^ Put all shelves and accessories back
into the appliance.
The left-hand support ribs for the
adjustable shelves have metal discs
(contacts) inside the receiving gaps
to supply the LED lighting with
electricity.
Ensure these contacts are clean and
dry before inserting the adjustable
shelf with lighting.
Push in the shelf until it audibly locks
into place. Only in this way can the
lighting work.
^ Connect the appliance again and
turn it on.
^ Turn on the SuperCool function in the
freezer to cool it down quickly.
^ Turn on the SuperCool function in the
refrigerator so it can cool down
quickly.
^ Place food in the refrigerator section
and close the door.
^ Once the temperature in the freezer
section is cold enough, you can
place the food in the freezer drawers
and return the drawers to the freezer.
^ As soon as the freezer section
reaches a constant temperature of at
least 0°F (-18°C), press the
SuperCool button to turn off the
function.