Asoni CAM411 User Manual page 22

3GPP Mode: Enable the streaming 2 as 3GPP mode, it allows a 3G mobile
phone to view the video.
Close: Disable the streaming 2.
Resolution: Select the resolution from the pull-down list.
VGA – 640X480
QVGA – 320X240
QQVGA – 160X120
Video Frame Rate:
streaming 1 and 2 is up to 30FPS (NTSC) / 25FPS (PAL). Before set the frame rate of
streaming 2, you have to reduce the frame rate of streaming 1, and then set the frame
rate of streaming 2.
Video Format:
MPEG4: The video stream will be compressed in MPEG4 format. Choose CBR
(Constant Bit Rate) or VBR (Variable Bit Rate) in Video Control Mode.
CBR: Set the Video Bitrate from 32Kbps ~ 2Mbps depend on the upload
bandwidth.
VBR: Set the Video Quantitative from 1 ~ 10, the higher value will get
better video quality.
JPEG: The video stream will be compressed in MJPEG format.
Quality: 5 levels for select. The higher quality will get bigger file size.
RTSP Path: Assign a name to identify this video stream. When view the video stream
with RTSP connection, the URL should be "rtsp://<Public IP of camera>:<RTSP
port>/<RTSP path>".
Streaming 2 Setting – 3GPP Mode
When configure the streaming 2 as 3GPP mode, the resolution is fixed to QQVGA
(160X120) and the video format is MPEG4.
Since the bandwidth of 3G is not fast usually, recommend set the Video Bitrate to
32Kbps.
The 3GPP Path is for assign a name to identify this video stream. When view the
video stream with RTSP connection, the URL should be "rtsp://<Public IP of
camera>:<RTSP port>/<RTSP path>".
After set up, click [Apply] to save the settings.
The video refreshing rate per second.
Choose MPEG4 or JPEG format to output the video stream.
21
The total frame rate of