Hitachi CM 4SB2 Handling Instructions Manual page 13

6
6. Replacing supply cord
If the replacement of the supply cord is neces-
sary, this has to be done by Hitachi Authorized
Service Center in order to avoid a safety hazard.
If the supply cord of this power tool is damaged,
it must be replaced by a specially prepared cord
available through the service organization.
7. Service parts list
CAUTION
Repair, modification and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
NOTE
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.