Switching The Cooktop Lighting On/Off; Power Management - Miele DA 6296 W Operating And Installation Instructions

Operation (manual mode)
Switching the cooktop lighting
on/off
The cooktop lighting can be switched
on and off independently of the fan.
 To do this, press .
The  symbol will light up when the
cooktop lighting is switched on.

Power management

The rangehood features a Power
management system to help save
energy. The fan power setting is
reduced and the lighting is switched off
automatically.
– If the Intensive setting is selected,
the fan automatically switches to
setting 3 after 5 minutes.
– From settings 3, 2 or 1 the power will
be reduced by one setting after 2
hours and then in 30-minute stages
until the fan finally switches off.
– The cooktop lighting will switch off
automatically after 12 hours.
Switching power management on/off
You can deactivate Power
management.
This can, however, result in increased
electricity consumption.
 Switch off the fan and the lighting.
 Press the run-on control 515 for
approx. 10 seconds, until the 1 lights
up.
 Then press in turn,
– the lighting control ,
– then the "" touch control, and
22
– the lighting control  again.
If Power management is switched on,
the 1 and IS indicators will light up
constantly.
If it is switched off, 1 and IS will flash.
 Press "" to switch Power
management off.
The 1 and IS indicators will flash.
 To switch it on, press "".
The 1 and IS indicators will light up
constantly.
 Confirm the setting by pressing the
run-on control 5 15.
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.