Memory; Anti-Crease; Delay Start - Miele TMV 840 WP Operating Instructions Manual

Memory

The electronics will store in memory a
drying level or options for a selected
programme. The duration selected for
a timed drying programme will also be
stored in memory. These settings will
then appear the next time the pro‐
gramme is chosen.
Options
– (Factory default setting)
Off
–
On
Exception:
The
Cottons
main unchanged.

Anti-crease

If you have selected the
option:
the drum will continue to rotate in a
special anti-crease rhythm for a maxi‐
mum of 2 hours after the end of the
drying process. This helps prevent
creasing if laundry is not going to be
removed immediately. You can reduce
the duration of the anti-crease phase.
Options
–
1 h
– (Factory default setting)
2 h
programme will re‐
Anti-crease

Delay start

With the Delay start function you can
delay the time at which the pro‐
gramme should start (see "Delay
start").
You can choose whether you want the
display to prompt you to enter the
time at which the programme should
start (Start at) or the time at which the
programme should end (Finish at).
Options
– (Factory default setting)
Start at
– *
Finish at
* As the programme duration is influ‐
enced by the quantity of laundry in
the load and the residual moisture
present in the laundry, this may
mean that the programme finishes
before or after the finish time which
appears in the display.
Settings menu
97