Changing The Filter - Jura IMPRESSA Z9 One Touch TFT Instructions For Use Manual

Changing the filter

E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
500 ml.
'Please select product:'
now activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your IMPRESSA will automatically prompt you
to change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E CLARIS filter cartridges are available from specialised dealers.
Precondition: 'Change the filter'
up.
O T Press the P button.
'Maintenance status (1/7)'
T Press the 'Change the filter'
'Approximate duration 2 min.'
T Press the 'Start'
'Use only original JURA maintenance products!'
T Press the 'Start'
'Change filter.'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge.
T Fit the filter extension on top of a new filter cartridge.
appears on the display. The filter is
is displayed and the P button lights
button.
button.
button again.
5 Maintenance
41