Phone Battery - Kyocera Rally User Manual

Phone Battery

Install the Battery
● To install the battery:
1. Hold the phone
face down.
2. Find the notch
directly below
the back cover.
Using your
thumbnail, pry
the cover up
from the bottom
to remove.
3. Place the battery
in the battery
casing. The
metal contacts of
the battery must
make contact
with the metal
contacts of the
battery casing.
4. Replace the
battery cover by
lining it up with
the edges of the
device and
pressing down
along the edges
to snap it into
place.
Get Started
Charge the Battery
You must have
at least a partial
charge in the
battery to make
or receive calls.
To charge the
battery:
1. Connect the
AC adapter to
the microUSB jack on the side of the
phone.
2. Plug the adapter into a wall outlet.
The battery icon in the upper-right corner
of the screen tells you whether the phone
is:
- Charging (the icon is animated)
- Partially charged
- Fully charged
You can safely recharge the battery at any
time, even if it has a partial charge.
Note: Before removing the battery,
make sure the phone is powered off.
5