Cub Cadet CS2210 Operator's Manual
  1. Manuals
  2. Brands
  3. Cub Cadet Manuals
  4. Chipper
  5. CS 2210 Series
  6. Operator's manual

Cub Cadet CS2210 Operator's Manual

Cub cadet cs2210 chipper/shredder
Hide thumbs Also See for CS2210:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty
O
'
M
peratOr
s
anual
Model Series CS2210
Chipper Shredder — Model Series CS2210 & CS3310
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Form No. 769-09750
(April 1, 2014)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS2210 and is the answer not in the manual?

Questions and answers

Related Manuals for Cub Cadet CS2210

Summary of Contents for Cub Cadet CS2210

  • Page 1 ’ peratOr anual Model Series CS2210 Chipper Shredder — Model Series CS2210 & CS3310 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

  • Page 2: Table Of Contents

    See How-to Maintenance and Parts Installation Videos at www.cubcadet.com/tutorials ◊ Call a Customer Support Representative at (800) 965-4CUB ◊ Locate your nearest Cub Cadet Dealer at (877) 282-8684 ◊ Write us at Cub Cadet • P.O. Box 361131 • Cleveland, OH • 44136-0019...

  • Page 3: Safe Operation Practices

    Important Safe Operation Practices WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 Safe Handling of Gasoline: If it becomes necessary to push material through the shredder hopper, use a small diameter stick. Do not use To avoid personal injury or property damage use extreme care your hands or feet. in handling gasoline. Gasoline is extremely flammable and the If the impeller strikes a foreign object or if your machine vapors are explosive.
  • Page 5 Notice Regarding Emissions Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have Engines which are certified to comply with California and federal stopped. Disconnect the spark plug wire and ground it EPA emission regulations for SORE (Small Off Road Equipment) against the engine to prevent unintended starting.
  • Page 6 Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING—...

  • Page 7: Assembly & Set-Up

    Assembly & Set-Up Contents of Carton • One Chipper Shredder • One Operator’s Manual • One Engine Operator’s Manual • One Tow Bar • One Bag • One Safety Glasses • One Bottle of Oil Assembly To attach the bag: NOTE: This unit is shipped without gasoline or oil in the engine.
  • Page 8 Set-Up Tow Bar To attach the tow bar: Gas and Oil Fill-Up Remove the spring pin and clevis pin from the end of the Refer to the separate engine owner’s manual for additional tow bar receiver. See Figure 3-3. engine information. Add oil provided before starting unit for the first time out of the box.

  • Page 9: Controls & Features

    Recoil Starter Chipper Chute The recoil starter is located on the engine. Pull the recoil starter Branches up to two inches (model series CS2210) or three inches to start engine. (model series CS3310) in diameter may be fed into the chipper chute for chipping.

  • Page 10: Operation

    WARNING: Never operate the chipper shredder without chipper chute lowered into the operating Branches up to two inches (model series CS2210) or three position. inches (model series CS3310) in diameter can be fed into the chipper chute. Observe the following guidelines when chipping...
  • Page 11 Emptying the Bag Stop engine. Squeeze the locking buckle to release the bag’s drawstrap before loosening it from the chute deflector. See Figure 5-1. Figure 5-1 Empty the bag and reattach to the chute deflector opening. Refer to the “Set-Up & Adjustments” section of this manual.

  • Page 12: Maintenance & Adjustment

    Maintenance & Adjustments Maintenance Equipment Care • Clean the chipper shredder thoroughly after each use. General Recommendations • Wash bag periodically with water. Allow to dry thoroughly • Always observe safety rules when performing any in shade. maintenance. • If the reduction chamber becomes clogged, remove and •...
  • Page 13 Cleaning The Reduction Chamber Remove the hairpin clip from the clevis pin which extends through the housing and shredder screen. See Figure 6-1B. WARNING: The impeller’s shredder blade and Remove clevis pin. chipper blades are sharp. Wear leather work gloves Pivot the shredder screen upward.

  • Page 14: Service

    Service Blade Care Install a replacement blade (Part No. 742-0544B) with the hardware removed earlier or sharpen. Chipper Blades IMPORTANT: When sharpening the blade, protect hands by using gloves. Follow the original angle of grind and make WARNING: The impeller’s chipper blades are sure to remove an equal amount from each blade.
  • Page 15 Remove six flange nuts which secure hopper inlet guide to Remove the two internal hex screws, hex lock nuts, and impeller housing. See Figure 7-3A. lock washers which secure the shredder blade to the impeller. See Figure 7-3B. NOTE: Use a 3/16” hex key (Allen) wrench on the outside of the shredder blade and a 1/2”...

  • Page 16: Troubleshooting

    Troubleshooting Problem Cause Remedy Excessive Vibration 1. Loose parts or damaged impeller. 2. See authorized service dealer. Unit does not discharge 1. Discharge area clogged. 1. Stop engine immediately and disconnect spark plug wire. Clean flail screen and inside of discharge opening. 2.

  • Page 17: Replacement Parts

    Replacement Parts Component Part Number and Description 942-04050 Shredder Blade 942-0544B Chipper Blade 719-04308 Flail Blade (3 total) 634-04627 10 x 4.0 Pneumatic Wheel Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready).
  • Page 18 Notes...
  • Page 19 10 — n ection oteS...

  • Page 20: Warranty

    No implied warranty, including any implied warranty of “Cub Cadet” will, at its option, repair or replace, free of charge, any merchantability of fitness for a particular purpose, applies part found to be defective in materials or workmanship. This limited...

Table of Contents