Oase BioPress 4000 Operating Instructions Manual
Hide thumbs
Also See for BioPress 4000:
- Operating instructions manual (144 pages) ,
- Operating instructions manual (121 pages) ,
- Operating instructions manual (22 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Oase BioPress 4000
Summary of Contents for Oase BioPress 4000
- Page 1 4000/6000/10 000 BioPress...
-
Page 5: Safety Information
Safety information The company OASE has built this unit according to the state of the art and the valid safety regulations. Despite the above, hazards for persons and assets can emanate from this unit if it is used in an improper manner or not in accor- dance with its intended use, or if the safety instructions are ignored. - Page 6 − Never carry out technical modifications to the unit. − Only have repairs carried out by customer service points authorised by OASE. − The power connection cables cannot be replaced. When the cable is damaged, the unit or the component needs to be disposed of.
- Page 7 − Disconnect all hoses by turning off the union nuts (1). − Open the closing clamps of the filter container (2). BioPress 4000: Hold the filter container at the hold-down element and lift off cover including the foam filter pack- age (3).
- Page 8 - GB - − Clean under running water by vigorously compressing and releasing (6). Clean the bioballs, container, cover with meshed tube and press ring under running water (6). − Push on foam filters such that the pulling rod rests in the recess of the foam filters (7). −...
- Page 9 - GB - Storage/Over-wintering − Put the unit out of operation at water temperatures below 8 °C or, at the latest, when freezing temperatures are to be expected. − Drain and thoroughly clean the unit, check for damage. − Remove, clean, dry and store all filters in a frost-free environment. −...
Need help?
Do you have a question about the BioPress 4000 and is the answer not in the manual?
Questions and answers