z D&M Holdings s'efforce d'être une société "sans papier" aﬁn de contribuer à préserver l'environnement. Nous sommes sensibles à votre coopération et votre compréhension.

z D&M Holdings se esfuerza por ser una empresa sin papel para ayudar a conservar el medio ambiente. Se valora su cooperación y comprensión.

ESPAÑOL

FRANÇAIS

CD-ROM

Explains all operations of your receiver. Open the included CD-ROM on

your computer for detailed operating instructions.

Explique tout le fonctionnement de votre récepteur. Ouvrez le CD-ROM

inclus sur votre ordinateur pour pouvoir consulter la notice d'utilisation

détaillée.

Explica todas las operaciones del receptor. Abra el CD-ROM en el

ordenador para ver instrucciones detalladas de funcionamiento.

ENGLISH

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the AVR-1612 and is the answer not in the manual?

Questions and answers

Summary of Contents for Denon AVR-1612

Page 1 ESPAÑOL FRANÇAIS ENGLISH AV SURROUND RECEIVER AVR-1612 CD-ROM Explains all operations of your receiver. Open the included CD-ROM on your computer for detailed operating instructions. Getting Started Explains how to easily install, connect and setup a 5.1-channel home theater system.
Page 2: Safety Precautions
Install in accordance with the manufacturer’s instructions. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. approved by DENON may void your authority, granted by the FCC, to use Do not install near any heat sources such as radiators, heat registers, the product.
Page 3: Cautions On Installation
ENGLISH FRANÇAIS ESPAÑOL n CAUTIONS ON INSTALLATION NOTES ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO PRÉCAUTIONS D’INSTALLATION WARNINGS AVERTISSEMENTS ADVERTENCIAS EMPLAZAMIENTO DE LA INSTALACIÓN Avoid high temperatures. Eviter des températures élevées. Evite altas temperaturas. Allow for sufﬁcient heat dispersion when installed in Tenir compte d’une dispersion de chaleur Permite la suﬁciente dispersión del calor cuando a rack.
Page 4: Table Of Contents
ENGLISH Read before use Thank you for purchasing this DENON product. This manual explains the Setup Wizard that you will need to perform directly after removing the product from its packaging, before you start using the product. The Setup Wizard displays easy to follow guidance on your television screen that shows you how to connect and conﬁgure speakers, various other devices, and network functions for full enjoyment of this unit.
Page 5: R6/Aa Batteries
ENGLISH Preparing the Setup Wizard This section describes how to prepare the Setup Wizard before use. n Do not plug the power plug of the main unit into the wall socket until these preparations are complete. n Speaker connections are performed using the Setup Wizard. Do not connect the speakers yet. What you need for this step Place and layout speakers Speaker...
Page 6 ENGLISH Connect this unit to the television using an HDMI cable Turn the television power on, and switch the video input to (sold separately) this unit (HDMI input) For details on how to operate the television, see the television instruction manual. NOTE If this unit is connected using cables other than the HDMI cable, the Setup Wizard will not be displayed.
Page 7: Source Setup
ENGLISH Setup Wizard When preparations are complete, start the Setup Wizard. Use the Setup Wizard to perform connections and settings as shown in the following steps. Perform the operations as described in the instructions on the screen. You can skip or cancel at each section if necessary. Language Select Source Setup Source Setup...
Page 8 ENGLISH Basic operation of Setup Wizard Getting Started Insert the main unit power plug into the wall Press to set the remote control unit to AMP- Speaker Connection socket. operation mode. Please select the speaker configuration to be used. Switch the AMP-operation mode 5.1ch Others Move to the item that...
Page 9 ENGLISH n Connecting the speakers The speakers are connected in “2. Speaker Connection” of the Setup Wizard but if you did not use or cancelled the Setup Wizard, connect the speakers as shown below. For details, see the included CD-ROM (Owner’s manual). Connect 5.1-channel Carefully check the left (L) and right (R) channels and...
Page 10: Playback (Basic Operation)
ENGLISH ENGLISH Playback (Basic operation) Here, we explain how to perform simple operations. For details, see the included CD-ROM (Owner’s manual). Selecting the input source Important information n Using the “Source Select” menu Before starting playback, make the connections between the different devices and the settings on the unit.
Page 11: Adjusting The Master Volume
ENGLISH ENGLISH Adjusting the master volume Other operations M df to adjust the volume. See the following items on the included CD-ROM n When the “Volume Display” setting (Owner’s manual). (vm page 63) is “Relative” n Playing a Blu-ray Disc player/DVD player GAdjustable rangeH n Playing an iPod ®...
Page 12 D&M Holdings Inc. 5421 10053 009D...
Page 13 AV SURROUND RECEIVER AVR-1612 Owner’s Manual...
Page 14 Install in accordance with the manufacturer’s instructions. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. approved by DENON may void your authority, granted by the FCC, to use Do not install near any heat sources such as radiators, heat registers, the product.
Page 15 n CAUTIONS ON INSTALLATION NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time.
Page 16: Accessories
Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Contents Accessories Advanced version ·······························································33 Getting started ··············································································1 Speaker installation/connection (Advanced connection) ·······34...
Page 17: Preparing The Setup Wizard
Features Cautions on handling • Before turning the power on Fully discrete, identical quality and power for all 4-HDMI inputs and 1-output Check once again that all connections are correct and that there are 5 channels (120 W x 5ch) The unit is equipped with 4 HDMI input connectors for connecting no problems with the connection cables.
Page 18: Basic Version
Basic version Basic version Here, we explain the connections and basic operation methods for this unit. F Connections vpage 4 F Settings vpage 11 F Playback (Basic operation) vpage 18 F Selecting a listening mode (Surround mode) vpage 29 vpage 6, vpage 6, Connection Connection – vpage 19 Playback Playback...
Page 19: Setup Wizard
Connections Important information • Make connections as follows before using this unit. Select an appropriate connection type Examples of screen display according to the devices to be connected. • You may need to make some settings on this unit depending on the connection method. Refer to • Menu screen • Status display screen each description for more information.
Page 20: Connecting An Hdmi-Compatible Device
Connecting an HDMI-compatible device You can connect up to five HDMI-compatible devices (4-inputs/1-output) to the unit. About 3D function HDMI function This unit supports input and output of 3D (3 dimensional) video signals of HDMI 1.4a. This unit supports the following HDMI functions: To play back 3D video, you need a TV and player that provide support for the HDMI 1.4a 3D function and • 3D a pair of 3D glasses.
Page 21 Connecting an HDMI-compatible device Cables used for connections Audio and video cable (sold separately) • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. HDMI cable • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
Page 22: Selecting The Input Source
Connecting a TV Connecting a Blu-ray Disc player/DVD player • Select the connector to use and connect the device. • You can enjoy video and audio from a Blu-ray Disc or DVD. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 5). • Select the connector to use and connect the device.
Page 23: Connecting A Set-Top Box (Satellite Tuner/Cable
Connecting a set-top box (Satellite tuner/Cable TV) Connecting a digital camcorder • You can watch satellite or cable TV. • You can enjoy video and audio from a digital camcorder. • Select the connector to use and connect the device. • For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 5). • For instructions on HDMI connections, see “Connecting an HDMI-compatible device”...
Page 24: Connecting A Control Dock For Ipod
Cable supplied with the DENON control dock for iPod. • When you want to play back a video file stored on an iPod, use a DENON control dock for iPod (ASD-1R and ASD-11R, sold separately) (vpage 9 “Connecting a control dock for iPod”).
Page 25: Am Loop Antenna
Connecting an antenna • Connect the FM antenna or AM loop antenna supplied with the unit n AM loop antenna assembly to enjoy listening to radio broadcasts. Put the stand section • After connecting the antenna and receiving a broadcast signal Stand (vpage ...
Page 26: Settings
Settings Here, we explain “Audyssey ® Auto Setup”, which allows you to Set up speakers (Audyssey ® Auto Setup) automatically make the optimal settings for your speakers. n Set up speakers (Audyssey ® Auto Setup) The acoustic characteristics of the connected speakers and (vpage 11) About setup microphone placement listening room are measured and the optimum settings are made...
Page 27 Set up speakers (Audyssey ® Auto Setup) Set up the microphone Set up the subwoofer Set up the remote control unit Mount the setup microphone on a tripod or stand If using a subwoofer capable of the following n Set up the operation mode and place it in the main listening position.
Page 28 Set up speakers (Audyssey ® Auto Setup) STEP 2 STEP 1 Preparation Detect & Measure (Main) • In STEP 2, you will perform measurements at the main listening Connect the setup microphone to the SETUP MIC to select “Auto Setup Start” and then press position.
Page 29 Set up speakers (Audyssey ® Auto Setup) STEP 4 STEP 2 (Continued) STEP 3 Detect & Measure (Main) Measure (2nd – 6th) Calculate • In STEP 3, you will perform measurements at multiple positions (two NOTE On the screen, use to select “Next → to six positions) other than the main listening position.
Page 30 Set up speakers (Audyssey ® Auto Setup) STEP 5 STEP 6 Finish Check Store Unplug the setup microphone from the unit’s SETUP ENTER to select the item you Select “Store” and then press MIC jack. want to check, and then press Save the measurement results.
Page 31: Error Messages
Set up speakers (Audyssey ® Auto Setup) Error messages NOTE • An error message is displayed if Audyssey ® Auto Setup could not be completed due to speaker placement, the measurement environment, etc. If this happens, check the relevant items, be sure to take the necessary measures, then perform Audyssey ®...
Page 32 Set up speakers (Audyssey ® Auto Setup) Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Auto Setup. to select “Parameter Check” and then press ENTER Auto Setup Auto Setup Sp. Config. Check Parameter Check Distance Check Ch.
Page 33: Playback (Basic Operation)
Playback (Basic operation) n Using the “Source Select” menu Important information Settings (vpage 11) Source Select Before starting playback, make the connections between the different devices and the settings on the unit. n Selecting the input source (vpage 18) Player Video Tuner NOTE n Adjusting the master volume (vpage 19) SAT/CBL...
Page 34: Playing A Blu-Ray Disc Player/Dvd Player
Important information Playing a Blu-ray Disc player/DVD Adjusting the master volume Turning off the sound temporarily player M df to adjust the volume. Press The following describes the procedure for playing Blu-ray Disc player/ • The power indicator flashes green. DVD player. n When the “Volume Display”...
Page 35: Playing An Ipod
Albums Songs • “Remote iPod” is displayed on the display of this unit. Genres If you use a separately sold DENON control dock for iPod (ASD-1R, Composers ASD-11R, ASD-3N, ASD-3W, ASD-51N or ASD-51W), you will be able Display mode Browse mode Remote mode to play back videos, photos, music, and other content on the iPod.
Page 36 “DOCK”. NOTE • Note that DENON will accept no responsibility whatsoever for any problems arising with the data on an iPod when using this unit in If the connections screen is not displayed, conjunction with the iPod.
Page 37 • English letters, numbers and certain symbols are displayed. iPod”). Incompatible characters are displayed as “.” (period). “Dock Remote” is displayed on the Set the iPod in the DENON control display of this unit. Remote mode Display iPod information on the iPod screen.
Page 38 Playing an iPod Connect an iPod directly to the USB port n iPod operation Press SEARCH and hold it down for 2 seconds or to play back Operation buttons Function more to select the display mode. MENU Amp menu • There are two modes for displaying the contents recorded on the Cursor operation / You can use the USB cable provided with the iPod to connect the iPod iPod.
Page 39 Page search (Press and release) functions may not operate. SEARCH • Note that DENON will accept no responsibility whatsoever for any Browse / Remote mode switching (Press and hold) problems arising with the data on an iPod when using this unit in...
Page 40: Tuning In Radio Stations
Tuning in radio stations n Presetting radio stations (Manual preset) Default settings Listening to FM/AM broadcasts Your favorite broadcast stations can be preset so that you can tune Block (A – G) TUNER Press to switch the input them in easily. Up to 56 stations can be preset. Default Settings source to “TUNER”.
Page 41 Tuning in radio stations n Listening to preset stations n Direct frequency tuning n Tuner (FM/AM) operation You can enter the receiving frequency directly to tune in. Operation buttons Function SHIFT Press to select the memory CH +, – Preset channel selection block (A to G).
Page 42: Playing A Usb Memory Device
• The limited number includes the root folder. NOTE n USB memory devices D&M1 • Note that DENON will accept no responsibility whatsoever for any D&M2 A USB memory device can be connected to the USB port of this D&M3 problems arising with the data on a USB memory device when using Music1.mp4...
Page 43 Playing a USB memory device n USB operation Operation buttons Function MENU Amp menu Cursor operation / uio p Auto search (cue, ui) ENTER Enter / Pause (Press and release) ENTER Stop (Press and hold) SEARCH Page search RETURN B Return Playback / Pause Auto search (cue)
Page 44: Selecting A Listening Mode (Surround Mode)
Selecting a listening mode (Surround mode) This unit can play input audio signals in multi-channel surround mode n Listening mode or in stereo mode. MOVIE MUSIC GAME DIRECT • The following listening modes can be selected using the , and buttons. Select a listening mode suitable for the playback contents (cinema, • Adjust the sound field effect with the menu “Surr.Parameter”...
Page 45 Selecting a listening mode z1 2-channel also includes analog input. Operation Operation Input signal Listening mode Input signal Listening mode z2 This mode plays back 2-channel source in 5.1 or 7.1-channel button button playback. It cannot be selected when headphones are used, or STEREO STEREO when only front speakers are used.
Page 46 Selecting a listening mode n Description of listening mode types Dolby listening mode DTS listening mode Listening mode type Description Listening mode type Description DOLBY PLgx This mode can be selected when a Dolby Pro Logic gx decoder is used to DTS NEO:6 This mode can be selected when a DTS NEO:6 decoder is used to play back 2-channel source in 6.1/7.1-channel surround sound including the surround...
Page 47 Selecting a listening mode DENON original listening mode Listening mode type Description MULTI CH STEREO This mode is for enjoying stereo sound from all speakers. The same sound as that from the front speakers (L/R) is played back at the same level from the surround speakers (L/R) and surround back speakers (L/R).
Page 48: Advanced Version
Advanced version Advanced version Here, we explain functions and operations that let you make better use of this unit. F Speaker installation/connection (Advanced connection) vpage 34 F Playback (Advanced operation) vpage 42 F How to make detailed settings vpage 46 F Operating the connected devices by remote control unit vpage 71...
Page 49: Speaker Installation/Connection (Advanced Connection)
Speaker installation/connection (Advanced connection) Here we describe the installation, connection and Install setup methods for speakers other than 5.1-channel speakers. For the installation, connection and setup When 7.1ch (Surround back speaker) installed methods for 5.1-channel speakers, see C page 4 This unit is compatible with Dolby Pro Logic gz (vpage ...
Page 50 Install When 7.1ch (Front height speaker) installed When 6.1ch (Surround back speaker) installed When 2.1ch speakers installed Listening position Listening position Listening position z1 22˚ – 30˚ z2 22˚ – 45˚ z3 90˚ – 110˚ GSpeaker abbreviationsH z1 22˚ – 30˚ z2 90˚...
Page 51: Connect
Connect C page • For the method of connecting 5.1-channel speakers, see 6 “Connecting the speakers”. • For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)”. 7.1-channel (Surround back speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers.
Page 52 Connect 7.1-channel (Front height speaker) connection The illustration on the right shows a connection example for performing 7.1-channel playback using the front height speakers. To perform 7.1-channel playback using the front height speaker, set “Pre Assign” to “F.HEIGHT” in steps 3 and 4 for “Set up “Pre Assign””...
Page 53 Connect 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the SURR. BACK/FRONT HEIGHT terminal. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 35). To perform 6.1-channel playback using the surround back speaker, set “Pre Assign”...
Page 54 Connect 2.1-channel connection NOTE • For speaker cable connections, see C page 6 “Connecting the speakers”. • For speaker impedance, see page 36.
Page 55: Set Up Speakers
Set up speakers around items indicate the settings. Here we describe how to set up speakers other than 5.1-channel speakers. For the method of setting up 5.1-channel speakers, see C page 4 “Setup wizard”. First install and connect the speakers to this unit. Before Auto Setup measurement, the settings shown below can be made.
Page 56 Set up speakers to select the to set whether or not a surround back Set up “Channel Select” configuration of the connected channel is measured. to select “Channel Select”, and then press speakers. Measure ENTER Set for measuring two surround back speakers. (2 sp) Measure Audyssey Auto Setup...
Page 57: Playback (Advanced Operation)
Playback (Advanced operation) Convenient functions Settings (vpage 11) HDMI control function n Setting procedure Playback (Basic operation) (vpage 18) Set the HDMI output connector corresponding with If you connect the unit and an HDMI control function compatible TV or the HDMI control function. player with an HDMI cable and then enable the HDMI control function Selecting a listening mode (Surround mode) setting on each device, the devices will be able to control each other.
Page 58: Sleep Timer Function
Convenient functions Sleep timer function NOTE • When “HDMI Control” is set to “ON”, it consumes more The power automatically goes into standby once the set time has standby power. elapsed. • The HDMI control function controls operations of a TV that is This is convenient for playing sources while going to sleep.
Page 59 Convenient functions Adjusting the volume of the speakers n Adjusting the volume of groups of speakers Use o p to adjust the volume. (Fader function) You can adjust the channel level either according to the playback This function lets you adjust (fade) the sound all at once from the sources or to suit your taste, as described below.
Page 60: Quick Select Function
Convenient functions Quick select function n Recalling the settings Various memory functions QUICK SELECT Press at which the All of the settings in step 1 can be memorized together. By memorizing n Personal memory plus function frequently used settings, you can quickly access and enjoy a playback settings you want to call out are saved.
Page 61: How To Make Detailed Settings
How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. Setting items Detailed items Description Page Audio Adjust Surr.Parameter Adjusts surround sound parameters.
Page 62: Examples Of Menu Screen Displays
Examples of menu screen displays Typical examples are described below. GExample 2H Audyssey ® Auto Setup screen GExample 1H Menu selection screen (Top menu) (with illustration) Menu Audyssey Auto Setup MultEQ Audio Adjust Surr.Parameter Information Tone Preparation Setup Wizard AudysseySettings Set the following items System Setup Manual EQ...
Page 63: Examples Of Menu And Front Display
Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description MENU q Press to display the menu screen. Top menu display Menu w TV screen: Displays the selected line.
Page 64: Inputting Characters
Inputting characters Keyboard screen You can change the names as desired using the “Preset Name” Using the keyboard screen (vpage 67), “Rename” (vpage 70), “Quick Sel.Name” (vpage 64) and character input for the network functions. Display the screen for inputting n Display of a keyboard input screen For inputting characters, there are three methods, as shown below.
Page 65 (vpage 46 Example: For changing the input source from “DVD” to “DENON” “Menu map”). Repeat steps 3 and 4 to change the name then press q Place the cursor at “V”.
Page 66: Audio Adjust
Audio Adjust The sound being played in the surround mode can be adjusted to your liking. Items that can be set with the “Audio Adjust” procedure The items (parameters) that can be adjusted depend on the signal being input and the currently set surround mode.
Page 67 Audio Adjust Surr.Parameter Setting items Setting details Default settings are underlined. –10dB – 0dB Adjust surround sound parameters. It may not be possible to set this item depending on the input signal Adjust the low-frequency For proper playback of the different sources, we recommend setting (vpage 84 “Surround modes and surround parameters”).
Page 68 Audio Adjust Setting items Setting details Setting items Setting details n For 2-channel sources Height Gain Low : Reduce the front height channel volume. S.Back Control front height Middle : Front height channel sound is output with standard sound Sets the method of ON : The surround back channel is used.
Page 69 Audio Adjust Tone Audyssey Settings Default settings are underlined. Set Audyssey MultEQ ® , Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected Adjust the tonal quality of the sound. after Audyssey ® Auto Setup has been performed. For additional information on Audyssey technology, Setting items Setting details please see page 89.
Page 70 Audio Adjust Manual EQ Setting items Setting details Default settings are underlined. Dynamic EQ ® ON : Use Dynamic EQ ® . Use the graphic equalizer to adjust the tone of each speaker. OFF : Do not use Dynamic EQ ® . Solve the problem of “Manual EQ”...
Page 71: Audio Delay
Audio Adjust RESTORER Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression.
Page 72: Information
Information Items Setting details Show information about receiver settings, input signals, etc. Quick Select Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 Items Setting details Show information about • Name / Volume Level / Select Source / Video Select / Status The information displayed differs according to the input source.
Page 73: System Setup
System Setup Set when changing Audyssey ® Auto Setup settings, or when changing the audio, video, display Items that can be set with the “System Setup” procedure or other settings. • If you change the speaker settings after performing Audyssey ® Auto Setup, it will not be possible to set Audyssey MultEQ ®...
Page 74 System Setup Setting items Setting details Speaker Setup Default settings are underlined. Speaker Config. Subwoofer : Set the presence of a subwoofer. (Continued) • Yes : Use a subwoofer. Perform when setting the speakers manually or when changing settings made in Audyssey ® Auto Setup. • No : Select when a subwoofer is not connected.
Page 75 System Setup Setting items Setting details Setting items Setting details Speaker Config. F.Height : Set the presence and size of the front height speakers. Distance Unit : Set the unit of distance. (Continued) • Large : Use a large speaker that can adequately play back low Set distance from listening • Feet / Meters frequencies.
Page 76 System Setup Setting items Setting details Setting items Setting details Channel Level Test Tone Start : Output test tone. Crossover Freq. Crossover : Set the crossover frequency. Set the volume of the test • Front L / F.Height L / Center / F.Height R / Front R / Surround R / Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / tone to be the same when it...
Page 77: Hdmi Setup
System Setup Setting items Setting details HDMI Setup Default settings are underlined. Standby Source Last : This item is set at the last-used input source. Sets the HDMI input source HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into Make settings for HDMI video/audio output.
Page 78 System Setup Audio Setup Option Setup Default settings are underlined. Default settings are underlined. Make settings for audio playback. Make various other settings. Setting items Setting details Setting items Setting details Auto Surround ON : Memorize settings. Automatically play with the last used surround Volume Control Volume Display : Set how volume is displayed.
Page 79 System Setup Setting items Setting details Setting items Setting details Screensaver : Make screensaver settings. iPod : Set the iPod screen display time when the input source is “DOCK” Make the settings related to • ON : The screensaver is activated during menu (Continued) or “USB/iPod”.
Page 80 System Setup Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit’s for at least 3 seconds.
Page 81: Input Setup
Input Setup Perform settings related to input source playback. Items that can be set with the “Input Setup” procedure • You do not have to change the settings to use the unit. Make settings when needed. Menu operation Auto Preset (vpage 67) Press to set the remote control unit to AMP-operation Preset Skip (vpage 67)
Page 82 Input Setup Auto Preset Preset Name Use the auto preset function to program radio stations. Assign name to a preset memory. Setting items Setting details Setting items Setting details A / B / C / D / E / F / G Start Block If an FM station cannot be preset automatically, select the desired...
Page 83 Input Setup Input Assign Setting items Setting details HDMI HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 Examples of “Input Assign” menu screen displays Set this to change the HDMI None : Do not assign an HDMI input connector to the selected input input connectors assigned source.
Page 84 Input Setup Input Mode (Audio) Setting items Setting details Default settings are underlined. Default Yes : Reset to the defaults. The “Input Assign” settings No : Do not reset to the defaults. The input modes available for selection may vary depending on the input source. are returned to the default ENTER If you select “Default”...
Page 85: Playback Mode
ENTER If you select “Default” and press , the Shuffle n When DENON control dock for iPod ASD-1R or ASD-11R is setting. message “Return settings to the default?” Make settings for shuffle connected is displayed. Select “Yes” or “No”, and then mode.
Page 86: Operating The Connected Devices By Remote Control Unit
Operating the connected devices by remote control unit Registering the supplied preset codes in the remote control unit Operate this unit or the device whose input source is Operation mode enables you to operate devices made by other manufacturers. Input Input source switched.
Page 87: Registering Preset Codes
The menu is displayed on the TV screen. select button DEVICE Z DEVICE X Use ui to select “System Setup” – “Option Setup” Blu-ray Disc player DENON 32258 For switching power of each device on or off. ENTER – “Remote Setup Guide” and then press uio p...
Page 88 Then press ENTER Press the buttons with an interval less than 10 seconds. RemoteSetupGuide RemoteSetupGuide RemoteSetupGuide Device Device [1/4] Please select the Brand Denon Brand Denon first letter of the Code 30490[1/3] Code 30490[1/3] brand name 1.Press[INPUT SOURCE]. 1.Press[INPUT SOURCE].
Page 89: Operating Devices
Registering preset codes Operating devices Either of the screens below is displayed. The supplied remote control unit can control a device other than this n CD player / CD recorder operation unit. Operation buttons Function Press the input source select uio p Cursor operation button to which the preset...
Page 90 Operating devices n DVD recorder / Personal video recorder (PVR) / n TV operation n Set top box for satellite (SAT) / cable (CBL) / Video cassette recorder (VCR) operation IP TV operation Operation buttons Function CH +, – Switch channels (up/down) Operation buttons Function Operation buttons...
Page 91: Resetting The Remote Control Unit
Resetting the remote control unit Settings for the remote control unit are returned to the default values. Press and hold DEVICE Z for at least 3 seconds. indicator flashes twice. Press , in that order. indicator flashes four times. All the settings are restored to their defaults.
Page 92: Information
Information Information Here, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 78 F Other information vpage 83 F Troubleshooting vpage 91 F Specifications vpage 95 F Index vpage 96...
Page 93: Part Names And Functions
Part names and functions Front panel For buttons not explained here, see the page indicated in parentheses ( ). Power operation button iPod system buttons ························································· (23, 94) Master volume indicator (ON/STANDBY) ································································· • Stop button (2) Display ······················································································ (79) Turns power to this unit on and off (standby). • Skip buttons (8, 9) Remote control sensor ···························································...
Page 94: Display
Display Audyssey ® indicators Decoder indicators RESTORER indicator Light up as follows, depending on the setting of “MultEQ ® ” These light when the respective decoders are operating. This lights when the RESTORER mode is selected (vpage 56). 54), “Dynamic EQ ® ” (vpage ...
Page 95: Rear Panel
Rear panel See the page indicated in parentheses ( ). FM/AM antenna terminals ····················································· (10) HDMI connectors ··························································· 3, 6) NOTE Analog audio connectors ······················································ (7, 8) PRE OUT connectors ············································· 6, 36, 37) Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
Page 96: Remote Control Unit
Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). Power buttons Signal transmission indicator ( ) ········· (76) (ON / STANDBY) ·································· Input source select buttons ······················· (18) SOURCE SELECT button ··························· (18) QUICK SELECT buttons ·····························...
Page 97 Remote control unit Inserting the batteries Operating range of the remote control unit Point the remote control unit at the remote sensor when operating it. q Slide the rear lid in the w Load the two batteries properly direction of the arrow and as indicated by the marks in remove it.
Page 98: Other Information
Other information Trademark information n Trademark information (vpage 83) This product uses the following technologies: n Surround (vpage 84) “Made for iPod” and “Made for n Relationship between video signals and monitor iPhone” mean that an electronic Manufactured under license from accessory has been designed to output (vpage 88) Dolby Laboratories.
Page 99: Surround
Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Surround modes and surround parameters This table shows the speakers that can be used in each surround mode and the surround parameters adjustable in each surround mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Page 100 Surround Surr.Parameter (vpage 52) Audyssey Settings z19 (vpage 54) NEO:6 Music PRO LOGIC g/gx Music mode only mode only Tone RESTORER PLgz Height AFDM Surround mode (vpage 29) Height Gain S.Back Subwoofer Dynamic Dynamic EQ ® (vpage 54) MultEQ ® Volume ® (vpage 56) (vpage 53) (vpage 53) (vpage 53) Panorama...
Page 101 Surround n Types of input signals, and corresponding surround modes This table shows the input signal that can be played in each surround mode. Check the audio signal of the input source then select the surround mode. Symbols in the table F This indicates the default surround mode.
Page 102 Surround Input signal types and formats DTS-HD DOLBY DOLBY DIGITAL NOTE Surround mode (vpage 29) DTS-HD DTS-HD High DTS ES DTS ES DOLBY DIGITAL ANALOG LINEAR PCM LINEAR PCM DOLBY DOLBY DOLBY DIGITAL DOLBY DIGITAL DOLBY DIGITAL Master Resolution DSCRT MTRX DTS 96/24 EX (With no (multi ch)
Page 103: Relationship Between Video Signals And Monitor Output
Relationship between video signals and monitor output Input connector Output connector Menu displayed HDMI S-VIDEO VIDEO HDMI VIDEO HDMI VIDEO Only the menu is displayed S <VIDEO> Only the menu is displayed A (VIDEO) S <S-VIDEO> Only the menu is displayed A (S-VIDEO) S <HDMI>...
Page 104: Explanation Of Terms
Explanation of terms Dolby Digital Dolby Pro Logic gx Downmix Dolby Digital is a multi-channel digital signal format This function converts the number of channels of Dolby Pro Logic gx is a further improved version of Adobe RGB color, Adobe YCC601 color developed by Dolby Laboratories.
Page 105 Explanation of terms DTS-HD High Resolution Audio DTS-HD High Resolution Audio is an improved Sampling frequency version of the conventional DTS, DTS-ES and This is an abbreviation of Low Frequency Effect, Sampling involves taking a reading of a sound wave DTS 96/24 signals formats, compatible with which is an output channel that emphasizes (analog signal) at regular intervals and expressing...
Page 106: Troubleshooting
• This unit amplifier circuit has failed. Turn off the power and please – No picture appears. • Check the TV connection. power, the power contact the DENON service adviser. • Set the TV input correctly. indicator is blinking red in intervals of approximately 0.5 seconds.
Page 107 GAudioH Symptom Cause/Solution Page Symptom Cause/Solution Page • Check that “Speaker Config.” – “Center” or “Surround” is set Dolby PLg mode or Audio is not output. • Check the connections for all devices. to other than “None”. If the speaker system is 2.0/2.1ch, this DTS NEO:6 mode surround mode cannot be selected.
Page 108 • A USB memory device that the set cannot recognize is connected. – • Insert the batteries in the proper direction, checking the q and This is not a malfunction. DENON does not guarantee that all USB w marks. memory devices will operate or receive power.
Page 109: Resetting The Microprocessor
Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. ON/STANDBY ON/STANDBY Turn off the power using Press ON/STANDBY while simultaneously pressing Once the display starts flashing at intervals of about 1 second, release the two buttons.
Page 110: Specifications
Specifications n Audio section n Tuner section [FM] [AM] • Power amplifier (Note: μV at 75 Ω, 0 dBf = 1 x 10 –15 Rated output: Front: Receiving Range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz 75 W + 75 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV...
Page 111 Index Cable TV····························································· 8 Control dock for iPod ········································· 9 Effect Level ························································ 52 Manual EQ ························································· 55 v Numerics Digital camcorder ··············································· 8 EQ Customize ···················································· 63 Master volume ··················································· 64 DVD player ····················································· 6, 7 2.1-channel ··················································· 35, 39 Error messages (Auto Setup) ·····························...
Page 112 Quick select ······················································· 45 Tone ··································································· 54 Quick Sel.Name ················································· 64 Tone Control ······················································· 54 Trademark ·························································· 83 Treble ································································· 54 Troubleshooting ················································· 91 Random ······························································ 70 Turning off the sound temporarily ······················ 19 Rear panel ·························································· 80 Reference Offset ··············································· 55 Remote control setting ································...
Page 113 Dimensions Unit : in. (mm) 17 1/8 (435.0) Weight : 20 lbs 8.0 oz (9.3 kg)
Page 114 D&M Holdings Inc. 3520 10017 003D...

Denon AVR-1612 Manual

Read before Use

Playback (Basic Operation)

Important Information

Adjusting the Master Volume

Turning off the Sound Temporarily

Getting Started

Accessories

Before Turning the Power on

About Condensation

Preparing the Setup Wizard

Basic Version

Setup Wizard

Connections

Selecting the Input Source

Settings

Playback (Basic Operation)

Selecting a Listening Mode (Surround Mode)

Advanced Version

Speaker Installation/Connection (Advanced Connection)

Playback (Advanced Operation)

How to Make Detailed Settings

Operating the Connected Devices by Remote Control Unit

Information

Part Names and Functions

Other Information

Troubleshooting

Specifications

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for Denon AVR-1612

Summary of Contents for Denon AVR-1612

Table of Contents