2. Insert the adapter’s USB connector into an available USB port on your computer or device. Thank you for choosing the Linksys USB Ethernet Adapter. This adapter lets you easily connect any device with a USB port – such as your computer, game console, or DVR –...
Linksys Chapter 2: Driver Installation Chapter 2: Driver Installation 4. Select Next to advance to the next screen After physically connecting the adapter to your computer’s USB port or hub, follow these instructions to install the hardware device driver. The installation procedures for the hardware device driver vary depending on your computer’s...
Linksys Chapter 2: Driver Installation 6. When the driver is finished installing, click Finish 3. Open up the CD’s folder followed by the MAC folder 4. Open the Installer file 5. Follow the steps in the Installer application, when the installation is complete you will be asked to restart your Mac.
Page 7
Linksys Chapter 2: Driver Installation When your Mac restarts you’re done with installation of the USB Ethernet Adapter . For more information about networking under OS X, refer to your Mac OS X documentation .
Make sure that the adapter is properly inserted into the USB slot. The adapter does not work properly . Remove the adapter, and reinsert it into the computer’s USB slot. WEB: If your questions are not addressed here, refer to the Linksys website, www .linksys .com...
Linksys Appendix B: Specifications Appendix B: Specifications Model Storage Temp . USB3GIG USB Ethernet Adapter 32 to 158ºF (0 to 70ºC) Standards Operating Humidity USB 1.0, USB 1.1, USB 2.0, USB 3.0 10 to 90% Noncondensing IEEE 802.3, IEEE 802.3u...
Need help?
Do you have a question about the USB3GIG and is the answer not in the manual?
Questions and answers